What is the low beam headlight bulb size for a 2013 Toyota Sequoia?

The 2013 Toyota Sequoia uses a H11 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 Toyota Sequoia?

The high beam bulb size for the 2013 Toyota Sequoia is 9005 LED.

Why are my 2013 Toyota Sequoia headlights dim?

Dim headlights on a 2013 Toyota Sequoia can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H11 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 Toyota Sequoia fog light?

The 2013 Toyota Sequoia uses a 9145 LED bulb for the fog light position.

Is the 2013 Toyota Sequoia single or dual beam?

The 2013 Toyota Sequoia uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2013 Toyota Sequoia?

Yes, the 2013 Toyota Sequoia comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H11 LED LED conversion kit for the low beams.

Does the 2013 Toyota Sequoia have fog lights?

Yes, the 2013 Toyota Sequoia takes a 9145 LED bulb for the fog light position.

Did the 2013 Toyota Sequoia change headlight bulb sizes from the previous year?

No — the 2013 Toyota Sequoia uses the same bulb sizes as the 2012 model. This configuration has been consistent across the 2012–2013 generation.

Is the 2013 Toyota Sequoia the first or last year to use H11 LED bulbs?

The 2013 Toyota Sequoia is the last year in the 2012–2013 generation to use the H11 LED bulb for the low beam headlight.

How do I change the headlight on a 2013 Toyota Sequoia?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H11 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 Toyota Sequoia?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H11 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 Toyota Sequoia headlights?

A pair of halogen H11 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 Toyota Sequoia?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H11 LED position are available as direct plug-and-play replacements.

The 2013 Toyota Sequoia is the last model year to use this bulb configuration (2012–2013).

Fitment Guaranteed for 2013 Toyota Sequoia

What Size Bulbs Does a 2013 Toyota Sequoia Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 Toyota Sequoia Have?

When it comes to nighttime visibility, the 2013 Toyota Sequoia relies on an arrangement of 16 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H11 LED low beam and 9005 LED high beam bulbs for precise light distribution. This model belongs to the mid years of the Sequoia's 2001-2023 production span.

Can You Put LED Bulbs in a 2013 Toyota Sequoia?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H11 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Don't forget the 9145 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2013 Toyota Sequoia Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H11 LED	Buy H11 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	7443CK	Buy 7443CK →
Side Marker	7443 LED	Buy 7443 LED →
Turn Signal Front	4157NA LED	Buy 4157NA LED →
Turn Signal Rear	7440NA LED	Buy 7440NA LED →
Reverse Light	921	Buy 921 →
Dome Light	168	Buy 168 →
License Plate	168	Buy 168 →
Map Light	168	Buy 168 →
Parking Light	4157NA	Buy 4157NA →
Trunk Light	578	Buy 578 →
Daytime Running	3157CK	Buy 3157CK →
Tail Light	194	Buy 194 →
Door Light	168	Buy 168 →

How do the 2013 Toyota Sequoia's bulbs compare to other years?

The 2013 Toyota Sequoia uses the same bulbs as the 2012 model.

The 2014 model switched to a different bulb configuration.

This bulb configuration covers the 2012–2013 model years. ← 2012 2014 →

Finding the best installation guide...

Other Sequoia Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use H11 LED Bulbs

2023 Honda Odyssey 2023 Nissan Maxima 2023 Nissan Murano 2022 Ford F-250 2022 Honda CR-V 2022 Honda Pilot