What is the low beam headlight bulb size for a 2007 Toyota Sequoia?

The 2007 Toyota Sequoia uses a 9003 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2007 Toyota Sequoia?

The high beam bulb size for the 2007 Toyota Sequoia is 9003 LED.

Why are my 2007 Toyota Sequoia headlights dim?

Dim headlights on a 2007 Toyota Sequoia can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9003 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2007 Toyota Sequoia fog light?

The 2007 Toyota Sequoia uses a 9006 LED bulb for the fog light position.

Is the 2007 Toyota Sequoia single or dual beam?

The 2007 Toyota Sequoia uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2007 Toyota Sequoia?

Yes, the 2007 Toyota Sequoia comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9003 LED LED conversion kit for the low beams.

Does the 2007 Toyota Sequoia have fog lights?

Yes, the 2007 Toyota Sequoia takes a 9006 LED bulb for the fog light position.

Did the 2007 Toyota Sequoia change headlight bulb sizes from the previous year?

No — the 2007 Toyota Sequoia uses the same bulb sizes as the 2006 model. This configuration has been consistent across the 2005–2007 generation.

Is the 2007 Toyota Sequoia the first or last year to use 9003 LED bulbs?

The 2007 Toyota Sequoia is the last year in the 2005–2007 generation to use the 9003 LED bulb for the low beam headlight.

How do I change the headlight on a 2007 Toyota Sequoia?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9003 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2007 Toyota Sequoia?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9003 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2007 Toyota Sequoia headlights?

A pair of halogen 9003 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2007 Toyota Sequoia?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9003 LED position are available as direct plug-and-play replacements.

The 2007 Toyota Sequoia is the last model year to use this bulb configuration (2005–2007).

Fitment Guaranteed for 2007 Toyota Sequoia

What Size Bulbs Does a 2007 Toyota Sequoia Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2007 Toyota Sequoia Have?

Lighting on the 2007 Toyota Sequoia is managed by a total of 15 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a halogen-based setup where a single 9003 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Sequoia's 2001-2023 production span.

Can You Put LED Bulbs in a 2007 Toyota Sequoia?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Sequoia uses a single 9003 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the 9006 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2007 Toyota Sequoia Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9003 LED	Buy 9003 LED →
High Beam	9003 LED	Buy 9003 LED →
Fog Light	9006 LED	Buy 9006 LED →
Brake Light	175 LED	Buy 175 LED →
Side Marker	7443 LED	Buy 7443 LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	7440NA LED	Buy 7440NA LED →
Reverse Light	921	Buy 921 →
Dome Light	DE3175	Buy DE3175 →
License Plate	168	Buy 168 →
Map Light	194	Buy 194 →
Parking Light	168	Buy 168 →
Trunk Light	DE3175	Buy DE3175 →
Tail Light	7443	Buy 7443 →
Door Light	194	Buy 194 →

How do the 2007 Toyota Sequoia's bulbs compare to other years?

The 2007 Toyota Sequoia uses the same bulbs as the 2006 model.

The 2008 model switched to a different bulb configuration.

This bulb configuration covers the 2005–2007 model years. ← 2006 2008 →

Finding the best installation guide...

Other Sequoia Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2006 2005 2004 2003 2002 2001

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use 9003 LED Bulbs

2023 Kia Rio 2020 Honda Fit 2019 MINI Cooper 2019 Nissan Micra 2019 Nissan Versa 2018 Honda HR-V