Skip to main content
Different Socket Types

H11 vs H7

The H11 and H7 are two of the most common automotive bulb types, but they use different sockets and are not interchangeable. The H11 is primarily used for Fog Light and Low Beam and fits 1,323 vehicles in our database. The H7 is typically found in the Low Beam and High Beam position across 2,434 vehicles. Many cars use both bulbs in different positions, which is why shoppers often compare them side by side. This guide covers the key differences in fitment, brightness, and application to help you identify which bulb goes where on your vehicle.

Vehicles Using H11

1,323

Vehicles Using H7

2,434

Use Both

452

Specification Comparison

FeatureH11H7
Mount Typequarter-turn bayonet mount that locks with a short twistspring clip or wire retainer that holds the bulb in the socket
Dual FilamentNo (single filament)No (single filament)
InterchangeableNo, different socket than H7No, different socket than H11
Also Known AsH8, H9, H16No equivalents

Why H11 and H7 Are Not Interchangeable

The H11 and H7 have different base designs and are not physically interchangeable. Attempting to force one into the other's socket can damage the housing or create a loose connection that causes flickering or overheating. If your vehicle uses both bulb types in different positions, make sure you purchase the correct size for each position. Always verify the specific bulb type stamped on the existing bulb or listed in your owner's manual before ordering replacements.

Vehicles Using Both H11 and H7

We found 452 vehicles that use both H11 and H7 bulbs in different positions. Common makes include Alfa Romeo, Audi, BMW, Chevrolet. These vehicles typically use one bulb type for the low beam and the other for the high beam or fog light, so you may need both sizes when doing a full lighting upgrade.

ModelYearH11 PositionH7 PositionView
Stelvio2022Fog LightLow BeamDetails
Stelvio2021Fog LightLow BeamDetails
Stelvio2020Fog LightLow BeamDetails
Stelvio2019Fog LightLow BeamDetails
Stelvio2018Fog LightLow BeamDetails

ModelYearH11 PositionH7 PositionView
A32013Fog LightHigh Beam, Low BeamDetails
A3 Quattro2013Fog LightHigh Beam, Low BeamDetails
A3 Quattro2012Fog LightHigh Beam, Low BeamDetails
A3 Quattro2011Fog LightHigh Beam, Low BeamDetails
A3 Quattro2010Fog LightHigh Beam, Low BeamDetails
A3 Quattro2009Fog LightHigh Beam, Low BeamDetails
A3 Quattro2008Fog Light, Low BeamHigh BeamDetails
A3 Quattro2007Fog Light, Low BeamHigh BeamDetails
A3 Quattro2006Fog Light, Low BeamHigh BeamDetails
A42012Fog LightHigh Beam, Low BeamDetails
A4 Avant2012Fog LightHigh Beam, Low BeamDetails
A4 Avant2011Fog LightLow Beam, High BeamDetails
A4 Avant2010Fog LightHigh Beam, Low BeamDetails
A4 Avant2009Fog LightHigh Beam, Low BeamDetails
A4 Avant2006Fog LightHigh Beam, Low BeamDetails

Showing 20 of 452 vehicles.

Frequently Asked Questions

No, the H11 and H7 have different base designs and cannot be swapped. Using the wrong bulb can damage the socket or produce incorrect beam patterns. Make sure you purchase the exact size listed for each position on your vehicle.

The H11 and H7 differ in base type, socket design, and typical application. The H11 is commonly used for Fog Light and Low Beam, while the H7 is typically found in the Low Beam and High Beam position.

In standard halogen form, brightness depends on the specific bulb's rated wattage rather than just the size designation. Both H11 and H7 are available in halogen, LED, and HID versions. LED upgrades for either size typically produce 200-300% more light than the stock halogen. The key is choosing a quality LED kit in the correct size for your socket.

Our database shows 452 vehicles that use both H11 and H7 in different positions. This is common when one size is used for low beams and the other for high beams or fog lights.

Both H11 and H7 bulbs are widely available at auto parts stores and online retailers like Amazon. LED upgrade kits typically cost $25-$60 per pair, while standard halogen replacements run $10-$30 per pair.