What is the low beam headlight bulb size for a 2004 Toyota MR2 Spyder?

The 2004 Toyota MR2 Spyder uses a H7 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2004 Toyota MR2 Spyder?

The high beam bulb size for the 2004 Toyota MR2 Spyder is 9005 LED.

Why are my 2004 Toyota MR2 Spyder headlights dim?

Dim headlights on a 2004 Toyota MR2 Spyder can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H7 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2004 Toyota MR2 Spyder fog light?

The 2004 Toyota MR2 Spyder uses a 9006 LED bulb for the fog light position.

Is the 2004 Toyota MR2 Spyder single or dual beam?

The 2004 Toyota MR2 Spyder uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2004 Toyota MR2 Spyder?

Yes, the 2004 Toyota MR2 Spyder comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H7 LED LED conversion kit for the low beams.

Does the 2004 Toyota MR2 Spyder have fog lights?

Yes, the 2004 Toyota MR2 Spyder takes a 9006 LED bulb for the fog light position.

Did the 2004 Toyota MR2 Spyder change headlight bulb sizes from the previous year?

Yes — the 2004 Toyota MR2 Spyder uses different bulb sizes than the 2003 model. The 2004–2005 generation introduced this bulb configuration.

Is the 2004 Toyota MR2 Spyder the first or last year to use H7 LED bulbs?

The 2004 Toyota MR2 Spyder is the first year in the 2004–2005 generation to use the H7 LED bulb for the low beam headlight.

How do I change the headlight on a 2004 Toyota MR2 Spyder?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H7 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2004 Toyota MR2 Spyder?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H7 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2004 Toyota MR2 Spyder headlights?

A pair of halogen H7 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2004 Toyota MR2 Spyder?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H7 LED position are available as direct plug-and-play replacements.

The 2004 Toyota MR2 Spyder is the first model year to use this bulb configuration (2004–2005).

Fitment Guaranteed for 2004 Toyota MR2 Spyder

What Size Bulbs Does a 2004 Toyota MR2 Spyder Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2004 Toyota MR2 Spyder Have?

The 2004 Toyota MR2 Spyder utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H7 LED low beam and 9005 LED high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 2004 Toyota MR2 Spyder?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H7 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Don't forget the 9006 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2004 Toyota MR2 Spyder Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H7 LED	Buy H7 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	9006 LED	Buy 9006 LED →
Brake Light	168 LED	Buy 168 LED →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	7440 LED	Buy 7440 LED →
Turn Signal Rear	7440NA LED	Buy 7440NA LED →
Reverse Light	7440	Buy 7440 →
License Plate	168	Buy 168 →
Map Light	DE3175	Buy DE3175 →
Parking Light	168	Buy 168 →
Trunk Light	LED Light	Buy LED Light →
Tail Light	7443CK	Buy 7443CK →

How do the 2004 Toyota MR2 Spyder's bulbs compare to other years?

The 2004 Toyota MR2 Spyder changed bulb sizes from 2003. The previous model year used a different configuration.

The 2005 model continues with the same bulb sizes.

This bulb configuration covers the 2004–2005 model years. ← 2003 2005 →

Finding the best installation guide...

Other MR2 Spyder Years

2005 2003 2002 2001 2000

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use H7 LED Bulbs

2023 Hyundai Kona 2023 Kia Forte 2022 Hyundai Veloster 2021 Hyundai Tucson 2019 BMW 330i xDrive 2019 BMW X1