What is the low beam headlight bulb size for a 1996 Toyota Land Cruiser?

The 1996 Toyota Land Cruiser uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 Toyota Land Cruiser?

The high beam bulb size for the 1996 Toyota Land Cruiser is 9005 LED.

Why are my 1996 Toyota Land Cruiser headlights dim?

Dim headlights on a 1996 Toyota Land Cruiser can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 Toyota Land Cruiser fog light?

The 1996 Toyota Land Cruiser uses a LED Fog Light bulb for the fog light position.

Is the 1996 Toyota Land Cruiser single or dual beam?

The 1996 Toyota Land Cruiser uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1996 Toyota Land Cruiser?

Yes, the 1996 Toyota Land Cruiser comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 1996 Toyota Land Cruiser have fog lights?

Yes, the 1996 Toyota Land Cruiser takes a LED Fog Light bulb for the fog light position.

Did the 1996 Toyota Land Cruiser change headlight bulb sizes from the previous year?

No — the 1996 Toyota Land Cruiser uses the same bulb sizes as the 1995 model. This configuration has been consistent across the 1993–1997 generation.

How do I change the headlight on a 1996 Toyota Land Cruiser?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 Toyota Land Cruiser?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 Toyota Land Cruiser headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 Toyota Land Cruiser?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements.

The 1996 Toyota Land Cruiser shares its bulb sizes with the 1993–1997 generation.

Fitment Guaranteed for 1996 Toyota Land Cruiser

What Size Bulbs Does a 1996 Toyota Land Cruiser Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 Toyota Land Cruiser Have?

Owners of the 1996 Toyota Land Cruiser will find a total of 13 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 LED low beam and 9005 LED high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 1996 Toyota Land Cruiser?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9006 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1996 Toyota Land Cruiser Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	1157	Buy 1157 →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	1156 LED	Buy 1156 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
License Plate	168 or 89	Buy 168 or 89 →
Map Light	293	Buy 293 →
Parking Light	168	Buy 168 →
Trunk Light	DE3022 or DE3175	Buy DE3022 or DE3175 →
Tail Light	1157	Buy 1157 →

How do the 1996 Toyota Land Cruiser's bulbs compare to other years?

The 1996 Toyota Land Cruiser uses the same bulbs as the 1995 model.

The 1997 model continues with the same bulb sizes.

This bulb configuration covers the 1993–1997 model years. ← 1995 1997 →

Finding the best installation guide...

Other Land Cruiser Years

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use 9006 LED Bulbs

2020 Dodge Journey 2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2018 Chevrolet Express 2500 2015 Honda Civic 2015 Nissan Armada