What is the low beam headlight bulb size for a 2013 Toyota Land Cruiser?

The 2013 Toyota Land Cruiser uses a HID-D4S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 Toyota Land Cruiser?

The high beam bulb size for the 2013 Toyota Land Cruiser is 9005 LED.

Why are my 2013 Toyota Land Cruiser headlights dim?

Dim headlights on a 2013 Toyota Land Cruiser can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D4S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 Toyota Land Cruiser fog light?

The 2013 Toyota Land Cruiser uses a H16 LED bulb for the fog light position.

Is the 2013 Toyota Land Cruiser single or dual beam?

The 2013 Toyota Land Cruiser uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2013 Toyota Land Cruiser?

Yes, the 2013 Toyota Land Cruiser comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D4S LED LED conversion kit for the low beams.

Does the 2013 Toyota Land Cruiser have fog lights?

Yes, the 2013 Toyota Land Cruiser takes a H16 LED bulb for the fog light position.

Did the 2013 Toyota Land Cruiser change headlight bulb sizes from the previous year?

Yes — the 2013 Toyota Land Cruiser uses different bulb sizes than the 2012 model. The 2013–2015 generation introduced this bulb configuration.

Is the 2013 Toyota Land Cruiser the first or last year to use HID-D4S LED bulbs?

The 2013 Toyota Land Cruiser is the first year in the 2013–2015 generation to use the HID-D4S LED bulb for the low beam headlight.

How do I change the headlight on a 2013 Toyota Land Cruiser?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D4S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 Toyota Land Cruiser?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D4S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 Toyota Land Cruiser headlights?

A pair of HID HID-D4S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 Toyota Land Cruiser?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D4S LED position are available as direct plug-and-play replacements.

The 2013 Toyota Land Cruiser is the first model year to use this bulb configuration (2013–2015).

Fitment Guaranteed for 2013 Toyota Land Cruiser

What Size Bulbs Does a 2013 Toyota Land Cruiser Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2013 Toyota Land Cruiser Have?

Lighting on the 2013 Toyota Land Cruiser is managed by a total of 15 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D4S projector housings for high-intensity output.

Can You Put LED Bulbs in a 2013 Toyota Land Cruiser?

The 2013 Toyota Land Cruiser is already equipped with factory D4S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the H16 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2013 Toyota Land Cruiser Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D4S LED	Buy HID-D4S LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	H16 LED	Buy H16 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	168	Buy 168 →
Turn Signal Front	7444NA LED	Buy 7444NA LED →
Turn Signal Rear	921 LED	Buy 921 LED →
Reverse Light	921	Buy 921 →
Dome Light	175	Buy 175 →
License Plate	168	Buy 168 →
Map Light	175	Buy 175 →
Parking Light	7444NA	Buy 7444NA →
Trunk Light	DE3175	Buy DE3175 →
Daytime Running	9005	Buy 9005 →
Door Light	168	Buy 168 →

How do the 2013 Toyota Land Cruiser's bulbs compare to other years?

The 2013 Toyota Land Cruiser changed bulb sizes from 2012. The previous model year used a different configuration.

The 2014 model continues with the same bulb sizes.

This bulb configuration covers the 2013–2015 model years. ← 2012 2014 →

Finding the best installation guide...

Other Land Cruiser Years

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use HID-D4S LED Bulbs

2019 Mitsubishi Mirage 2018 Subaru Crosstek 2017 Lexus LS460 2017 Subaru Legacy 2017 Subaru Outback 2016 Mazda 3