What is the low beam headlight bulb size for a 1989 Toyota Land Cruiser?

The 1989 Toyota Land Cruiser uses a H4656 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1989 Toyota Land Cruiser?

The high beam bulb size for the 1989 Toyota Land Cruiser is H4656 LED.

Why are my 1989 Toyota Land Cruiser headlights dim?

Dim headlights on a 1989 Toyota Land Cruiser can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4656 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1989 Toyota Land Cruiser fog light?

The 1989 Toyota Land Cruiser uses a LED Fog Light bulb for the fog light position.

Is the 1989 Toyota Land Cruiser single or dual beam?

The 1989 Toyota Land Cruiser uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1989 Toyota Land Cruiser?

Yes, the 1989 Toyota Land Cruiser comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4656 LED LED conversion kit for the low beams.

Does the 1989 Toyota Land Cruiser have fog lights?

Yes, the 1989 Toyota Land Cruiser takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 1989 Toyota Land Cruiser?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4656 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1989 Toyota Land Cruiser?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4656 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1989 Toyota Land Cruiser headlights?

A pair of halogen H4656 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1989 Toyota Land Cruiser?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4656 LED position are available as direct plug-and-play replacements.

This vehicle is part of the 1988–1990 Toyota Land Cruiser generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 1989 Toyota Land Cruiser

What Size Bulbs Does a 1989 Toyota Land Cruiser Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1989 Toyota Land Cruiser Have?

When it comes to nighttime visibility, the 1989 Toyota Land Cruiser relies on an arrangement of 11 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single H4656 LED dual-filament bulb handles both low and high beam duties within the same reflector.

Can You Put LED Bulbs in a 1989 Toyota Land Cruiser?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Land Cruiser uses a single H4656 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1989 Toyota Land Cruiser Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H4656 LED	Buy H4656 LED →
High Beam	H4656 LED	Buy H4656 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	Brake Light Assembly	Buy Brake Light Assembly →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	1156 LED	Buy 1156 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
License Plate	89	Buy 89 →
Parking Light	168	Buy 168 →
Trunk Light	LED Light	Buy LED Light →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other Land Cruiser Years

2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1988 1987 1986

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use H4656 LED Bulbs

1991 Chrysler New Yorker 1989 Plymouth Gran Fury 1989 Volvo 740 1988 Chrysler LeBaron 1987 Ford Crown Victoria 1987 Isuzu Impulse