What is the low beam headlight bulb size for a 2013 Mitsubishi Lancer Sportback?

The 2013 Mitsubishi Lancer Sportback uses a 9006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 Mitsubishi Lancer Sportback?

The high beam bulb size for the 2013 Mitsubishi Lancer Sportback is 9005.

Why are my 2013 Mitsubishi Lancer Sportback headlights dim?

Dim headlights on a 2013 Mitsubishi Lancer Sportback can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 Mitsubishi Lancer Sportback fog light?

The 2013 Mitsubishi Lancer Sportback uses a H11 bulb for the fog light position.

Is the 2013 Mitsubishi Lancer Sportback single or dual beam?

The 2013 Mitsubishi Lancer Sportback uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2013 Mitsubishi Lancer Sportback?

Yes, the 2013 Mitsubishi Lancer Sportback comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED conversion kit for the low beams.

Does the 2013 Mitsubishi Lancer Sportback have fog lights?

Yes, the 2013 Mitsubishi Lancer Sportback takes a H11 bulb for the fog light position.

Did the 2013 Mitsubishi Lancer Sportback change headlight bulb sizes from the previous year?

Yes — the 2013 Mitsubishi Lancer Sportback uses different bulb sizes than the 2012 model. The 2013 generation introduced this bulb configuration.

Is the 2013 Mitsubishi Lancer Sportback the first or last year to use 9006 bulbs?

The 2013 Mitsubishi Lancer Sportback is the only year in the 2013 generation to use the 9006 bulb for the low beam headlight.

How do I change the headlight on a 2013 Mitsubishi Lancer Sportback?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 Mitsubishi Lancer Sportback?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 Mitsubishi Lancer Sportback headlights?

A pair of halogen 9006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 Mitsubishi Lancer Sportback?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 position are available as direct plug-and-play replacements.

The 2013 Mitsubishi Lancer Sportback has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2013 Mitsubishi Lancer Sportback

What Size Bulbs Does a 2013 Mitsubishi Lancer Sportback Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 Mitsubishi Lancer Sportback Have?

When it comes to nighttime visibility, the 2013 Mitsubishi Lancer Sportback relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 low beam and 9005 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 2013 Mitsubishi Lancer Sportback?

Upgrading to LED is one of the most effective ways to modernize your Mitsubishi's appearance and safety profile. We recommend starting your upgrade with the 9006 low beams, as they see the most use. Adding a matching 9005 LED kit later will complete the look and ensure consistent lighting performance. Don't forget the H11 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2013 Mitsubishi Lancer Sportback Bulb Size Chart

Position	Bulb Size	Shop
Daytime Running	1156	Buy 1156 →
High Beam	9005	Buy 9005 →
Turn Signal Front	7440NA	Buy 7440NA →
Fog Light	H11	Buy H11 →
Low Beam	9006	Buy 9006 →
Side Marker	W5W	Buy W5W →
License Plate	W5W	Buy W5W →
Turn Signal Rear	7440NA	Buy 7440NA →
Reverse Light	7440	Buy 7440 →
Brake Light	7443	Buy 7443 →
Tail Light	7443	Buy 7443 →
Dome Light	DE3175	Buy DE3175 →
Map Light	DE3175	Buy DE3175 →