What is the low beam headlight bulb size for a 2011 Mazda 3 H/Back?

The 2011 Mazda 3 H/Back uses a H11 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2011 Mazda 3 H/Back?

The high beam bulb size for the 2011 Mazda 3 H/Back is 9005.

Why are my 2011 Mazda 3 H/Back headlights dim?

Dim headlights on a 2011 Mazda 3 H/Back can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H11 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2011 Mazda 3 H/Back fog light?

The 2011 Mazda 3 H/Back uses a H11 bulb for the fog light position.

Is the 2011 Mazda 3 H/Back single or dual beam?

The 2011 Mazda 3 H/Back uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2011 Mazda 3 H/Back?

Yes, the 2011 Mazda 3 H/Back comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H11 LED conversion kit for the low beams.

Does the 2011 Mazda 3 H/Back have fog lights?

Yes, the 2011 Mazda 3 H/Back takes a H11 bulb for the fog light position.

Did the 2011 Mazda 3 H/Back change headlight bulb sizes from the previous year?

Yes — the 2011 Mazda 3 H/Back uses different bulb sizes than the 2010 model. The 2011 generation introduced this bulb configuration.

Is the 2011 Mazda 3 H/Back the first or last year to use H11 bulbs?

The 2011 Mazda 3 H/Back is the only year in the 2011 generation to use the H11 bulb for the low beam headlight.

How do I change the headlight on a 2011 Mazda 3 H/Back?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H11 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2011 Mazda 3 H/Back?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H11 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2011 Mazda 3 H/Back headlights?

A pair of halogen H11 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2011 Mazda 3 H/Back?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H11 position are available as direct plug-and-play replacements.

The 2011 Mazda 3 H/Back has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2011 Mazda 3 H/Back

What Size Bulbs Does a 2011 Mazda 3 H/Back Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2011 Mazda 3 H/Back Have?

The 2011 Mazda 3 H/Back utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H11 low beam and 9005 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 2011 Mazda 3 H/Back?

Upgrading to LED is one of the most effective ways to modernize your Mazda's appearance and safety profile. We recommend starting your upgrade with the H11 low beams, as they see the most use. Adding a matching 9005 LED kit later will complete the look and ensure consistent lighting performance. Don't forget the H11 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2011 Mazda 3 H/Back Bulb Size Chart

Position	Bulb Size	Shop
Fog Light	H11	Buy H11 →
Low Beam	H11	Buy H11 →
Daytime Running	7443	Buy 7443 →
High Beam	9005	Buy 9005 →
Reverse Light	7440	Buy 7440 →
Turn Signal Rear	7440NA	Buy 7440NA →
Brake Light	7443	Buy 7443 →
Side Marker	7443	Buy 7443 →
Tail Light	7443	Buy 7443 →
Parking Light	W5W	Buy W5W →
License Plate	W5W	Buy W5W →
Dome Light	DE3175	Buy DE3175 →
Map Light	DE3175	Buy DE3175 →