What is the low beam headlight bulb size for a 2012 Jeep Compass?

The 2012 Jeep Compass uses a H11 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2012 Jeep Compass?

The high beam bulb size for the 2012 Jeep Compass is 9005 LED.

Why are my 2012 Jeep Compass headlights dim?

Dim headlights on a 2012 Jeep Compass can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H11 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2012 Jeep Compass fog light?

The 2012 Jeep Compass uses a 2504 LED bulb for the fog light position.

Is the 2012 Jeep Compass single or dual beam?

The 2012 Jeep Compass uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2012 Jeep Compass?

Yes, the 2012 Jeep Compass comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H11 LED LED conversion kit for the low beams.

Does the 2012 Jeep Compass have fog lights?

Yes, the 2012 Jeep Compass takes a 2504 LED bulb for the fog light position.

Did the 2012 Jeep Compass change headlight bulb sizes from the previous year?

No — the 2012 Jeep Compass uses the same bulb sizes as the 2011 model. This configuration has been consistent across the 2011–2013 generation.

How do I change the headlight on a 2012 Jeep Compass?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H11 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2012 Jeep Compass?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H11 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2012 Jeep Compass headlights?

A pair of halogen H11 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2012 Jeep Compass?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H11 LED position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2012 Jeep Compass shares its bulb sizes with the 2011–2013 generation.

Fitment Guaranteed for 2012 Jeep Compass

What Size Bulbs Does a 2012 Jeep Compass Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2012 Jeep Compass Have?

When it comes to nighttime visibility, the 2012 Jeep Compass relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H11 LED low beam and 9005 LED high beam bulbs for precise light distribution. This model belongs to the mid years of the Compass's 2007-2022 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2012 Jeep Compass?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H11 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 2504 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2012 Jeep Compass Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H11 LED	Buy H11 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	2504 LED	Buy 2504 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	W5W	Buy W5W →
Turn Signal Front	7444NA LED	Buy 7444NA LED →
Turn Signal Rear	7440NA LED	Buy 7440NA LED →
Reverse Light	7440	Buy 7440 →
Dome Light	578	Buy 578 →
License Plate	2825	Buy 2825 →
Map Light	578	Buy 578 →
Parking Light	7444NA	Buy 7444NA →
Trunk Light	578	Buy 578 →

How do the 2012 Jeep Compass's bulbs compare to other years?

The 2012 Jeep Compass uses the same bulbs as the 2011 model.

The 2013 model continues with the same bulb sizes.

This bulb configuration covers the 2011–2013 model years. ← 2011 2013 →

Finding the best installation guide...

Other Compass Years

2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2011 2010 2009 2008 2007

Other Vehicles That Use H11 LED Bulbs

2023 Honda Odyssey 2023 Nissan Maxima 2023 Nissan Murano 2023 Toyota 4Runner 2023 Toyota Tacoma 2022 Ford F-250