What is the low beam headlight bulb size for a 2016 Ford Police Interceptor Utility?

The 2016 Ford Police Interceptor Utility uses a 9005 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2016 Ford Police Interceptor Utility?

The high beam bulb size for the 2016 Ford Police Interceptor Utility is 9005.

Why are my 2016 Ford Police Interceptor Utility headlights dim?

Dim headlights on a 2016 Ford Police Interceptor Utility can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9005 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2016 Ford Police Interceptor Utility fog light?

The 2016 Ford Police Interceptor Utility typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2016 Ford Police Interceptor Utility single or dual beam?

The 2016 Ford Police Interceptor Utility uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2016 Ford Police Interceptor Utility?

Yes, the 2016 Ford Police Interceptor Utility comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9005 LED conversion kit for the low beams.

Did the 2016 Ford Police Interceptor Utility change headlight bulb sizes from the previous year?

Yes — the 2016 Ford Police Interceptor Utility uses different bulb sizes than the 2015 model. The 2016 generation introduced this bulb configuration.

Is the 2016 Ford Police Interceptor Utility the first or last year to use 9005 bulbs?

The 2016 Ford Police Interceptor Utility is the only year in the 2016 generation to use the 9005 bulb for the low beam headlight.

How do I change the headlight on a 2016 Ford Police Interceptor Utility?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9005 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2016 Ford Police Interceptor Utility?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9005 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2016 Ford Police Interceptor Utility headlights?

A pair of halogen 9005 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2016 Ford Police Interceptor Utility?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9005 position are available as direct plug-and-play replacements.

The 2016 Ford Police Interceptor Utility has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2016 Ford Police Interceptor Utility

What Size Bulbs Does a 2016 Ford Police Interceptor Utility Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Moderate (Dust covers often present)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2016 Ford Police Interceptor Utility Have?

When it comes to nighttime visibility, the 2016 Ford Police Interceptor Utility relies on an arrangement of 10 specialized bulbs. It features a comprehensive lighting system powered by a halogen-based setup where a single 9005 dual-filament bulb handles both low and high beam duties within the same reflector.

Can You Put LED Bulbs in a 2016 Ford Police Interceptor Utility?

For a Ford built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Police Interceptor Utility uses a single 9005 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb.

2016 Ford Police Interceptor Utility Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9005	Buy 9005 →
Side Marker	W5W	Buy W5W →
High Beam	9005	Buy 9005 →
Turn Signal Front	3757NA	Buy 3757NA →
License Plate	W5W	Buy W5W →
Turn Signal Rear	7440NA	Buy 7440NA →
Parking Light	3757NA	Buy 3757NA →
Reverse Light	7440	Buy 7440 →
Dome Light	168	Buy 168 →
Map Light	168	Buy 168 →

How do the 2016 Ford Police Interceptor Utility's bulbs compare to other years?

The 2016 Ford Police Interceptor Utility changed bulb sizes from 2015. The previous model year used a different configuration.

The 2017 model switched to a different bulb configuration.

This bulb configuration covers the 2016 model years. ← 2015 2017 →

Finding the best installation guide...

Other Police Interceptor Utility Years

2022 2021 2020 2019 2018 2017 2015 2014 2013

Other Vehicles That Use 9005 Bulbs

2022 Honda Accord 2022 Hyundai Elantra 2022 Kia Niro 2022 Kia Seltos 2022 Kia Soul 2022 Kia Stinger

9005 Comparisons

9005 vs 9006 9005 vs H11 9005 vs H7 9005 vs HB3