What is the low beam headlight bulb size for a 1998 Chrysler Sebring?

The 1998 Chrysler Sebring uses a 9006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1998 Chrysler Sebring?

The high beam bulb size for the 1998 Chrysler Sebring is 9005.

Why are my 1998 Chrysler Sebring headlights dim?

Dim headlights on a 1998 Chrysler Sebring can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1998 Chrysler Sebring fog light?

The 1998 Chrysler Sebring uses a 9006 bulb for the fog light position.

Is the 1998 Chrysler Sebring single or dual beam?

The 1998 Chrysler Sebring uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1998 Chrysler Sebring?

Yes, the 1998 Chrysler Sebring comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED conversion kit for the low beams.

Does the 1998 Chrysler Sebring have fog lights?

Yes, the 1998 Chrysler Sebring takes a 9006 bulb for the fog light position.

Did the 1998 Chrysler Sebring change headlight bulb sizes from the previous year?

Yes — the 1998 Chrysler Sebring uses different bulb sizes than the 1997 model. The 1998 generation introduced this bulb configuration.

Is the 1998 Chrysler Sebring the first or last year to use 9006 bulbs?

The 1998 Chrysler Sebring is the only year in the 1998 generation to use the 9006 bulb for the low beam headlight.

How do I change the headlight on a 1998 Chrysler Sebring?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1998 Chrysler Sebring?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1998 Chrysler Sebring headlights?

A pair of halogen 9006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1998 Chrysler Sebring?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1998 Chrysler Sebring has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1998 Chrysler Sebring

What Size Bulbs Does a 1998 Chrysler Sebring Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1998 Chrysler Sebring Have?

When it comes to nighttime visibility, the 1998 Chrysler Sebring relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 low beam and 9005 high beam bulbs for precise light distribution. This model belongs to the early years of the Sebring's 1995-2010 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1998 Chrysler Sebring?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9006 low beams, as they see the most use. Adding a matching 9005 LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 9006 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1998 Chrysler Sebring Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	168	Buy 168 →
Fog Light	9006	Buy 9006 →
High Beam	9005	Buy 9005 →
Low Beam	9006	Buy 9006 →
Turn Signal Front	1156	Buy 1156 →
Tail Light	3357	Buy 3357 →
Parking Light	3157NA	Buy 3157NA →
Reverse Light	1156	Buy 1156 →
License Plate	168	Buy 168 →
Brake Light	3157CK	Buy 3157CK →
Turn Signal Rear	1156	Buy 1156 →
Dome Light	DE3175	Buy DE3175 →
Trunk Light	DE3022	Buy DE3022 →