What is the low beam headlight bulb size for a 1995 Chrysler Sebring?

The 1995 Chrysler Sebring uses a 9006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1995 Chrysler Sebring?

The high beam bulb size for the 1995 Chrysler Sebring is 9005.

Why are my 1995 Chrysler Sebring headlights dim?

Dim headlights on a 1995 Chrysler Sebring can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1995 Chrysler Sebring fog light?

The 1995 Chrysler Sebring typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1995 Chrysler Sebring single or dual beam?

The 1995 Chrysler Sebring uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1995 Chrysler Sebring?

Yes, the 1995 Chrysler Sebring comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED conversion kit for the low beams.

How do I change the headlight on a 1995 Chrysler Sebring?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1995 Chrysler Sebring?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1995 Chrysler Sebring headlights?

A pair of halogen 9006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1995 Chrysler Sebring?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1995 Chrysler Sebring has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1995 Chrysler Sebring

What Size Bulbs Does a 1995 Chrysler Sebring Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1995 Chrysler Sebring Have?

Lighting on the 1995 Chrysler Sebring is managed by a total of 11 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 low beam and 9005 high beam bulbs for precise light distribution. This model belongs to the early years of the Sebring's 1995-2010 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1995 Chrysler Sebring?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9006 low beams, as they see the most use. Adding a matching 9005 LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1995 Chrysler Sebring Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	1156	Buy 1156 →
High Beam	9005	Buy 9005 →
Low Beam	9006	Buy 9006 →
Side Marker	168	Buy 168 →
Reverse Light	1156	Buy 1156 →
Brake Light	921	Buy 921 →
Turn Signal Rear	1156	Buy 1156 →
Parking Light	168	Buy 168 →
License Plate	168	Buy 168 →
Dome Light	DE3175	Buy DE3175 →
Trunk Light	DE3022	Buy DE3022 →