What is the low beam headlight bulb size for a 2009 Chrysler Sebring?

The 2009 Chrysler Sebring uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2009 Chrysler Sebring?

The high beam bulb size for the 2009 Chrysler Sebring is 9005 LED.

Why are my 2009 Chrysler Sebring headlights dim?

Dim headlights on a 2009 Chrysler Sebring can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2009 Chrysler Sebring fog light?

The 2009 Chrysler Sebring uses a 9145 LED bulb for the fog light position.

Is the 2009 Chrysler Sebring single or dual beam?

The 2009 Chrysler Sebring uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2009 Chrysler Sebring?

Yes, the 2009 Chrysler Sebring comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 2009 Chrysler Sebring have fog lights?

Yes, the 2009 Chrysler Sebring takes a 9145 LED bulb for the fog light position.

How do I change the headlight on a 2009 Chrysler Sebring?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2009 Chrysler Sebring?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2009 Chrysler Sebring headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2009 Chrysler Sebring?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 2009 Chrysler Sebring

What Size Bulbs Does a 2009 Chrysler Sebring Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2009 Chrysler Sebring Have?

Owners of the 2009 Chrysler Sebring will find a total of 13 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 LED low beam and 9005 LED high beam bulbs for precise light distribution. This model belongs to the late years of the Sebring's 2002-2010 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2009 Chrysler Sebring?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9006 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 9145 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2009 Chrysler Sebring Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	921 LED	Buy 921 LED →
Side Marker	3757AK LED	Buy 3757AK LED →
Turn Signal Front	3757AK	Buy 3757AK →
Turn Signal Rear	3157K LED	Buy 3157K LED →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	212-2	Buy 212-2 →
Parking Light	3757AK	Buy 3757AK →
Reverse Light	3157K	Buy 3157K →
Trunk Light	562	Buy 562 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other Sebring Years

2010 2008 2006 2005 2004 2003 2002

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use 9006 LED Bulbs

2020 Dodge Journey 2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2018 Chevrolet Express 2500 2015 Honda Civic 2015 Nissan Armada