What is the low beam headlight bulb size for a 1997 Mazda 626?

The 1997 Mazda 626 uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1997 Mazda 626?

The high beam bulb size for the 1997 Mazda 626 is 9005 LED.

Why are my 1997 Mazda 626 headlights dim?

Dim headlights on a 1997 Mazda 626 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1997 Mazda 626 fog light?

The 1997 Mazda 626 uses a H3 LED bulb for the fog light position.

Is the 1997 Mazda 626 single or dual beam?

The 1997 Mazda 626 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1997 Mazda 626?

Yes, the 1997 Mazda 626 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 1997 Mazda 626 have fog lights?

Yes, the 1997 Mazda 626 takes a H3 LED bulb for the fog light position.

Did the 1997 Mazda 626 change headlight bulb sizes from the previous year?

No — the 1997 Mazda 626 uses the same bulb sizes as the 1996 model. This configuration has been consistent across the 1993–1997 generation.

Is the 1997 Mazda 626 the first or last year to use 9006 LED bulbs?

The 1997 Mazda 626 is the last year in the 1993–1997 generation to use the 9006 LED bulb for the low beam headlight.

How do I change the headlight on a 1997 Mazda 626?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1997 Mazda 626?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1997 Mazda 626 headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1997 Mazda 626?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements.

The 1997 Mazda 626 is the last model year to use this bulb configuration (1993–1997).

Fitment Guaranteed for 1997 Mazda 626

What Size Bulbs Does a 1997 Mazda 626 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1997 Mazda 626 Have?

Owners of the 1997 Mazda 626 will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 LED low beam and 9005 LED high beam bulbs for precise light distribution. This model belongs to the late years of the 626's 1980-2002 production span.

Can You Put LED Bulbs in a 1997 Mazda 626?

Upgrading to LED is one of the most effective ways to modernize your Mazda's appearance and safety profile. We recommend starting your upgrade with the 9006 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Don't forget the H3 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1997 Mazda 626 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	1157 LED	Buy 1157 LED →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	1157NA LED	Buy 1157NA LED →
Turn Signal Rear	1156NA LED	Buy 1156NA LED →
Dome Light	DE3175	Buy DE3175 →
License Plate	168	Buy 168 →
Map Light	168	Buy 168 →
Parking Light	1157NA	Buy 1157NA →
Reverse Light	1156	Buy 1156 →
Trunk Light	168	Buy 168 →
Tail Light	1157	Buy 1157 →

How do the 1997 Mazda 626's bulbs compare to other years?

The 1997 Mazda 626 uses the same bulbs as the 1996 model.

The 1998 model switched to a different bulb configuration.

This bulb configuration covers the 1993–1997 model years. ← 1996 1998 →

Finding the best installation guide...

Other 626 Years

2002 2001 2000 1999 1998 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980

More from Mazda

2 3 3 H/Back 3 Sedan 3 Sport 323 5 6

Other Vehicles That Use 9006 LED Bulbs

2020 Dodge Journey 2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2018 Chevrolet Express 2500 2015 Honda Civic 2015 Nissan Armada