What is the low beam headlight bulb size for a 1983 Mazda 626?

The 1983 Mazda 626 uses a 4652 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1983 Mazda 626?

The high beam bulb size for the 1983 Mazda 626 is H4651 LED.

Why are my 1983 Mazda 626 headlights dim?

Dim headlights on a 1983 Mazda 626 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 4652 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1983 Mazda 626 fog light?

The 1983 Mazda 626 uses a LED Fog Light bulb for the fog light position.

Is the 1983 Mazda 626 single or dual beam?

The 1983 Mazda 626 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1983 Mazda 626?

Yes, the 1983 Mazda 626 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 4652 LED LED conversion kit for the low beams.

Does the 1983 Mazda 626 have fog lights?

Yes, the 1983 Mazda 626 takes a LED Fog Light bulb for the fog light position.

Did the 1983 Mazda 626 change headlight bulb sizes from the previous year?

Yes — the 1983 Mazda 626 uses different bulb sizes than the 1982 model. The 1983 generation introduced this bulb configuration.

Is the 1983 Mazda 626 the first or last year to use 4652 LED bulbs?

The 1983 Mazda 626 is the only year in the 1983 generation to use the 4652 LED bulb for the low beam headlight.

How do I change the headlight on a 1983 Mazda 626?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 4652 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1983 Mazda 626?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 4652 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1983 Mazda 626 headlights?

A pair of halogen 4652 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1983 Mazda 626?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 4652 LED position are available as direct plug-and-play replacements.

The 1983 Mazda 626 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1983 Mazda 626

What Size Bulbs Does a 1983 Mazda 626 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1983 Mazda 626 Have?

Lighting on the 1983 Mazda 626 is managed by a total of 12 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 4652 LED low beam and H4651 LED high beam bulbs for precise light distribution. This model belongs to the early years of the 626's 1980-2002 production span.

Can You Put LED Bulbs in a 1983 Mazda 626?

Upgrading to LED is one of the most effective ways to modernize your Mazda's appearance and safety profile. We recommend starting your upgrade with the 4652 LED low beams, as they see the most use. Adding a matching H4651 LED LED kit later will complete the look and ensure consistent lighting performance. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1983 Mazda 626 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	4652 LED	Buy 4652 LED →
High Beam	H4651 LED	Buy H4651 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	LED Brake Light Assembly	Buy LED Brake Light Assembly →
Turn Signal Front	1157 LED	Buy 1157 LED →
Side Marker	67 LED	Buy 67 LED →
Turn Signal Rear	1157 LED	Buy 1157 LED →
Dome Light	DE3175	Buy DE3175 →
License Plate	89	Buy 89 →
Parking Light	1157	Buy 1157 →
Reverse Light	N/A	Buy N/A →
Trunk Light	LED Light	Buy LED Light →
Tail Light	1157	Buy 1157 →

How do the 1983 Mazda 626's bulbs compare to other years?

The 1983 Mazda 626 changed bulb sizes from 1982. The previous model year used a different configuration.

The 1984 model switched to a different bulb configuration.

This bulb configuration covers the 1983 model years. ← 1982 1984 →

Finding the best installation guide...

Other 626 Years

2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1982 1981 1980

More from Mazda

2 3 3 H/Back 3 Sedan 3 Sport 323 5 6

Other Vehicles That Use 4652 LED Bulbs

2001 Chevrolet W3500 Tiltmaster 2001 Chevrolet W4500 Tiltmaster 2001 Chevrolet W5500 Tiltmaster 1987 Mitsubishi Cordia 1984 Peugeot 604 1982 Nissan 720