What is the low beam headlight bulb size for a 2020 Chrysler Voyager?

The 2020 Chrysler Voyager uses a 9005 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2020 Chrysler Voyager?

The high beam bulb size for the 2020 Chrysler Voyager is 9005.

Why are my 2020 Chrysler Voyager headlights dim?

Dim headlights on a 2020 Chrysler Voyager can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9005 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2020 Chrysler Voyager fog light?

The 2020 Chrysler Voyager typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2020 Chrysler Voyager single or dual beam?

The 2020 Chrysler Voyager uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2020 Chrysler Voyager?

Yes, the 2020 Chrysler Voyager comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9005 LED conversion kit for the low beams.

Did the 2020 Chrysler Voyager change headlight bulb sizes from the previous year?

Yes — the 2020 Chrysler Voyager uses different bulb sizes than the 2003 model. The 2020 generation introduced this bulb configuration.

Is the 2020 Chrysler Voyager the first or last year to use 9005 bulbs?

The 2020 Chrysler Voyager is the only year in the 2020 generation to use the 9005 bulb for the low beam headlight.

How do I change the headlight on a 2020 Chrysler Voyager?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9005 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2020 Chrysler Voyager?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9005 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2020 Chrysler Voyager headlights?

A pair of halogen 9005 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2020 Chrysler Voyager?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9005 position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2020 Chrysler Voyager has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2020 Chrysler Voyager

What Size Bulbs Does a 2020 Chrysler Voyager Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Moderate (Dust covers often present)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2020 Chrysler Voyager Have?

When it comes to nighttime visibility, the 2020 Chrysler Voyager relies on an arrangement of 7 specialized bulbs. It features a standard lighting system powered by a halogen-based setup where a single 9005 dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the late years of the Voyager's 2000-2022 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2020 Chrysler Voyager?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. Since your Voyager uses a single 9005 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

2020 Chrysler Voyager Bulb Size Chart

Position	Bulb Size	Shop
Daytime Running	9005	Buy 9005 →
High Beam	9005	Buy 9005 →
Low Beam	9005	Buy 9005 →
Tail Light	7443	Buy 7443 →
Turn Signal Rear	7443	Buy 7443 →
Reverse Light	7440	Buy 7440 →
Brake Light	7443	Buy 7443 →