What is the low beam headlight bulb size for a 2014 Chrysler Town & Country?

The 2014 Chrysler Town & Country uses a HID-D1S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2014 Chrysler Town & Country?

The high beam bulb size for the 2014 Chrysler Town & Country is H11 LED.

Why are my 2014 Chrysler Town & Country headlights dim?

Dim headlights on a 2014 Chrysler Town & Country can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D1S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2014 Chrysler Town & Country fog light?

The 2014 Chrysler Town & Country uses a 2504 LED bulb for the fog light position.

Is the 2014 Chrysler Town & Country single or dual beam?

The 2014 Chrysler Town & Country uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2014 Chrysler Town & Country?

Yes, the 2014 Chrysler Town & Country comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D1S LED LED conversion kit for the low beams.

Does the 2014 Chrysler Town & Country have fog lights?

Yes, the 2014 Chrysler Town & Country takes a 2504 LED bulb for the fog light position.

Did the 2014 Chrysler Town & Country change headlight bulb sizes from the previous year?

No — the 2014 Chrysler Town & Country uses the same bulb sizes as the 2013 model. This configuration has been consistent across the 2011–2016 generation.

How do I change the headlight on a 2014 Chrysler Town & Country?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D1S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2014 Chrysler Town & Country?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D1S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2014 Chrysler Town & Country headlights?

A pair of HID HID-D1S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2014 Chrysler Town & Country?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D1S LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2014 Chrysler Town & Country shares its bulb sizes with the 2011–2016 generation.

Fitment Guaranteed for 2014 Chrysler Town & Country

What Size Bulbs Does a 2014 Chrysler Town & Country Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2014 Chrysler Town & Country Have?

When it comes to nighttime visibility, the 2014 Chrysler Town & Country relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D1S projector housings for high-intensity output. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2014 Chrysler Town & Country?

The 2014 Chrysler Town & Country is already equipped with factory D1S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the 2504 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2014 Chrysler Town & Country Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D1S LED	Buy HID-D1S LED →
High Beam	H11 LED	Buy H11 LED →
Fog Light	2504 LED	Buy 2504 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	W5W	Buy W5W →
Turn Signal Front	3757AK LED	Buy 3757AK LED →
Turn Signal Rear	3757AK LED	Buy 3757AK LED →
Reverse Light	3157	Buy 3157 →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	PC579	Buy PC579 →
Parking Light	3757AK	Buy 3757AK →
Trunk Light	578 or 561	Buy 578 or 561 →

How do the 2014 Chrysler Town & Country's bulbs compare to other years?

The 2014 Chrysler Town & Country uses the same bulbs as the 2013 model.

The 2015 model continues with the same bulb sizes.

This bulb configuration covers the 2011–2016 model years. ← 2013 2015 →

Finding the best installation guide...

Other Town & Country Years

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use HID-D1S LED Bulbs

2019 BMW X6 2019 Genesis G80 2019 Mercedes-Benz Benz GLS450 2019 Mercedes-Benz Benz GLS550 2019 Mercedes-Benz Benz GLS63 AMG 2019 Mercedes-Benz Benz SLC300