What is the low beam headlight bulb size for a 2000 Chrysler Town & Country?

The 2000 Chrysler Town & Country uses a 9005XS LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2000 Chrysler Town & Country?

The high beam bulb size for the 2000 Chrysler Town & Country is PC194.

Why are my 2000 Chrysler Town & Country headlights dim?

Dim headlights on a 2000 Chrysler Town & Country can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9005XS LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2000 Chrysler Town & Country fog light?

The 2000 Chrysler Town & Country uses a 9040 LED bulb for the fog light position.

Is the 2000 Chrysler Town & Country single or dual beam?

The 2000 Chrysler Town & Country uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2000 Chrysler Town & Country?

Yes, the 2000 Chrysler Town & Country comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9005XS LED LED conversion kit for the low beams.

Does the 2000 Chrysler Town & Country have fog lights?

Yes, the 2000 Chrysler Town & Country takes a 9040 LED bulb for the fog light position.

How do I change the headlight on a 2000 Chrysler Town & Country?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9005XS LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2000 Chrysler Town & Country?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9005XS LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2000 Chrysler Town & Country headlights?

A pair of halogen 9005XS LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2000 Chrysler Town & Country?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9005XS LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 1999–2000 Chrysler Town & Country generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2000 Chrysler Town & Country

What Size Bulbs Does a 2000 Chrysler Town & Country Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2000 Chrysler Town & Country Have?

Lighting on the 2000 Chrysler Town & Country is managed by a total of 13 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9005XS LED low beam and PC194 high beam bulbs for precise light distribution. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2000 Chrysler Town & Country?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9005XS LED low beams, as they see the most use. Adding a matching PC194 LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 9040 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2000 Chrysler Town & Country Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9005XS LED	Buy 9005XS LED →
High Beam	PC194	Buy PC194 →
Fog Light	9040 LED	Buy 9040 LED →
Brake Light	PC194	Buy PC194 →
Side Marker	3057 LED	Buy 3057 LED →
Turn Signal Front	4157NA LED	Buy 4157NA LED →
Turn Signal Rear	3057 LED	Buy 3057 LED →
Reverse Light	3057	Buy 3057 →
Dome Light	567 or 579	Buy 567 or 579 →
License Plate	168	Buy 168 →
Map Light	578 or 579 or PC579	Buy 578 or 579 or PC579 →
Parking Light	4157NA	Buy 4157NA →
Trunk Light	LED Light	Buy LED Light →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other Town & Country Years

2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2002 1999 1998 1997 1996

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest