What is the low beam headlight bulb size for a 2006 Chrysler Town & Country?

The 2006 Chrysler Town & Country uses a 9007 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2006 Chrysler Town & Country?

The high beam bulb size for the 2006 Chrysler Town & Country is 9007 LED.

Why are my 2006 Chrysler Town & Country headlights dim?

Dim headlights on a 2006 Chrysler Town & Country can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2006 Chrysler Town & Country fog light?

The 2006 Chrysler Town & Country uses a 9145 LED bulb for the fog light position.

Is the 2006 Chrysler Town & Country single or dual beam?

The 2006 Chrysler Town & Country uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2006 Chrysler Town & Country?

Yes, the 2006 Chrysler Town & Country comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED LED conversion kit for the low beams.

Does the 2006 Chrysler Town & Country have fog lights?

Yes, the 2006 Chrysler Town & Country takes a 9145 LED bulb for the fog light position.

How do I change the headlight on a 2006 Chrysler Town & Country?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2006 Chrysler Town & Country?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2006 Chrysler Town & Country headlights?

A pair of halogen 9007 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2006 Chrysler Town & Country?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 2005–2007 Chrysler Town & Country generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2006 Chrysler Town & Country

What Size Bulbs Does a 2006 Chrysler Town & Country Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2006 Chrysler Town & Country Have?

The 2006 Chrysler Town & Country utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by a halogen-based setup where a single 9007 LED dual-filament bulb handles both low and high beam duties within the same reflector. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2006 Chrysler Town & Country?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. Since your Town & Country uses a single 9007 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 9145 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2006 Chrysler Town & Country Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9007 LED	Buy 9007 LED →
High Beam	9007 LED	Buy 9007 LED →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	921K LED	Buy 921K LED →
Side Marker	3057 LED	Buy 3057 LED →
Turn Signal Front	3457AK LED	Buy 3457AK LED →
Turn Signal Rear	3057 LED	Buy 3057 LED →
Reverse Light	3057	Buy 3057 →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	PC579	Buy PC579 →
Parking Light	3757AK	Buy 3757AK →
Trunk Light	578	Buy 578 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other Town & Country Years

2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2005 2004 2002 2000 1999 1998 1997 1996

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use 9007 LED Bulbs

2019 Mitsubishi Mirage G4 2019 Nissan Frontier 2019 Nissan Versa Note 2015 Nissan Xterra 2014 Nissan Juke 2012 Mitsubishi Galant