What is the low beam headlight bulb size for a 1997 Chrysler Town & Country?

The 1997 Chrysler Town & Country uses a 9007 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1997 Chrysler Town & Country?

The high beam bulb size for the 1997 Chrysler Town & Country is PC194.

Why are my 1997 Chrysler Town & Country headlights dim?

Dim headlights on a 1997 Chrysler Town & Country can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1997 Chrysler Town & Country fog light?

The 1997 Chrysler Town & Country uses a H3 LED bulb for the fog light position.

Is the 1997 Chrysler Town & Country single or dual beam?

The 1997 Chrysler Town & Country uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1997 Chrysler Town & Country?

Yes, the 1997 Chrysler Town & Country comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED LED conversion kit for the low beams.

Does the 1997 Chrysler Town & Country have fog lights?

Yes, the 1997 Chrysler Town & Country takes a H3 LED bulb for the fog light position.

Did the 1997 Chrysler Town & Country change headlight bulb sizes from the previous year?

Yes — the 1997 Chrysler Town & Country uses different bulb sizes than the 1996 model. The 1997 generation introduced this bulb configuration.

Is the 1997 Chrysler Town & Country the first or last year to use 9007 LED bulbs?

The 1997 Chrysler Town & Country is the only year in the 1997 generation to use the 9007 LED bulb for the low beam headlight.

How do I change the headlight on a 1997 Chrysler Town & Country?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1997 Chrysler Town & Country?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1997 Chrysler Town & Country headlights?

A pair of halogen 9007 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1997 Chrysler Town & Country?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1997 Chrysler Town & Country has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1997 Chrysler Town & Country

What Size Bulbs Does a 1997 Chrysler Town & Country Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1997 Chrysler Town & Country Have?

Lighting on the 1997 Chrysler Town & Country is managed by a total of 14 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9007 LED low beam and PC194 high beam bulbs for precise light distribution. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1997 Chrysler Town & Country?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9007 LED low beams, as they see the most use. Adding a matching PC194 LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H3 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1997 Chrysler Town & Country Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9007 LED	Buy 9007 LED →
High Beam	PC194	Buy PC194 →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	PC194	Buy PC194 →
Side Marker	3057 LED	Buy 3057 LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	3057 LED	Buy 3057 LED →
Reverse Light	3057	Buy 3057 →
Dome Light	567 or 579	Buy 567 or 579 →
License Plate	168	Buy 168 →
Map Light	567 or 578	Buy 567 or 578 →
Parking Light	3157NA	Buy 3157NA →
Trunk Light	LED Light	Buy LED Light →
Tail Light	3157CK	Buy 3157CK →

How do the 1997 Chrysler Town & Country's bulbs compare to other years?

The 1997 Chrysler Town & Country changed bulb sizes from 1996. The previous model year used a different configuration.

The 1998 model switched to a different bulb configuration.

This bulb configuration covers the 1997 model years. ← 1996 1998 →

Finding the best installation guide...

Other Town & Country Years

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use 9007 LED Bulbs

2019 Mitsubishi Mirage G4 2019 Nissan Frontier 2019 Nissan Versa Note 2015 Nissan Xterra 2014 Nissan Juke 2012 Mitsubishi Galant