What is the low beam headlight bulb size for a 2010 Toyota Yaris?

The 2010 Toyota Yaris uses a 9003 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2010 Toyota Yaris?

The high beam bulb size for the 2010 Toyota Yaris is 9003 LED.

Why are my 2010 Toyota Yaris headlights dim?

Dim headlights on a 2010 Toyota Yaris can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9003 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2010 Toyota Yaris fog light?

The 2010 Toyota Yaris uses a H11 LED bulb for the fog light position.

Is the 2010 Toyota Yaris single or dual beam?

The 2010 Toyota Yaris uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2010 Toyota Yaris?

Yes, the 2010 Toyota Yaris comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9003 LED LED conversion kit for the low beams.

Does the 2010 Toyota Yaris have fog lights?

Yes, the 2010 Toyota Yaris takes a H11 LED bulb for the fog light position.

Did the 2010 Toyota Yaris change headlight bulb sizes from the previous year?

No — the 2010 Toyota Yaris uses the same bulb sizes as the 2009 model. This configuration has been consistent across the 2009–2011 generation.

How do I change the headlight on a 2010 Toyota Yaris?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9003 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2010 Toyota Yaris?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9003 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2010 Toyota Yaris headlights?

A pair of halogen 9003 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2010 Toyota Yaris?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9003 LED position are available as direct plug-and-play replacements.

The 2010 Toyota Yaris shares its bulb sizes with the 2009–2011 generation.

Fitment Guaranteed for 2010 Toyota Yaris

What Size Bulbs Does a 2010 Toyota Yaris Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2010 Toyota Yaris Have?

Owners of the 2010 Toyota Yaris will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single 9003 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Yaris's 2006-2019 production span.

Can You Put LED Bulbs in a 2010 Toyota Yaris?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Yaris uses a single 9003 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H11 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2010 Toyota Yaris Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9003 LED	Buy 9003 LED →
High Beam	9003 LED	Buy 9003 LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	921 LED	Buy 921 LED →
Side Marker	7443 LED	Buy 7443 LED →
Turn Signal Front	7443 LED	Buy 7443 LED →
Turn Signal Rear	7440NA LED	Buy 7440NA LED →
Reverse Light	921	Buy 921 →
Dome Light	DE3175	Buy DE3175 →
License Plate	2825	Buy 2825 →
Map Light	175	Buy 175 →
Parking Light	7443	Buy 7443 →
Trunk Light	194	Buy 194 →
Tail Light	7443CK	Buy 7443CK →

How do the 2010 Toyota Yaris's bulbs compare to other years?

The 2010 Toyota Yaris uses the same bulbs as the 2009 model.

The 2011 model continues with the same bulb sizes.

This bulb configuration covers the 2009–2011 model years. ← 2009 2011 →

Finding the best installation guide...

Other Yaris Years

2019 2018 2017 2016 2015 2014 2013 2012 2011 2009 2008 2007 2006

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use 9003 LED Bulbs

2023 Kia Rio 2020 Honda Fit 2019 MINI Cooper 2019 Nissan Micra 2019 Nissan Versa 2018 Honda HR-V