What is the low beam headlight bulb size for a 2007 Toyota Sienna?

The 2007 Toyota Sienna uses a 9006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2007 Toyota Sienna?

The high beam bulb size for the 2007 Toyota Sienna is 9005.

Why are my 2007 Toyota Sienna headlights dim?

Dim headlights on a 2007 Toyota Sienna can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2007 Toyota Sienna fog light?

The 2007 Toyota Sienna uses a 9006 bulb for the fog light position.

Is the 2007 Toyota Sienna single or dual beam?

The 2007 Toyota Sienna uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2007 Toyota Sienna?

Yes, the 2007 Toyota Sienna comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED conversion kit for the low beams.

Does the 2007 Toyota Sienna have fog lights?

Yes, the 2007 Toyota Sienna takes a 9006 bulb for the fog light position.

Did the 2007 Toyota Sienna change headlight bulb sizes from the previous year?

Yes — the 2007 Toyota Sienna uses different bulb sizes than the 2006 model. The 2007 generation introduced this bulb configuration.

Is the 2007 Toyota Sienna the first or last year to use 9006 bulbs?

The 2007 Toyota Sienna is the only year in the 2007 generation to use the 9006 bulb for the low beam headlight.

How do I change the headlight on a 2007 Toyota Sienna?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2007 Toyota Sienna?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2007 Toyota Sienna headlights?

A pair of halogen 9006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2007 Toyota Sienna?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 position are available as direct plug-and-play replacements.

The 2007 Toyota Sienna has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2007 Toyota Sienna

What Size Bulbs Does a 2007 Toyota Sienna Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2007 Toyota Sienna Have?

When it comes to nighttime visibility, the 2007 Toyota Sienna relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 low beam and 9005 high beam bulbs for precise light distribution. This model belongs to the mid years of the Sienna's 1998-2020 production span.

Can You Put LED Bulbs in a 2007 Toyota Sienna?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9006 low beams, as they see the most use. Adding a matching 9005 LED kit later will complete the look and ensure consistent lighting performance. Don't forget the 9006 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2007 Toyota Sienna Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	3157CK	Buy 3157CK →
Fog Light	9006	Buy 9006 →
Low Beam	9006	Buy 9006 →
High Beam	9005	Buy 9005 →
License Plate	168	Buy 168 →
Reverse Light	921	Buy 921 →
Parking Light	3157CK	Buy 3157CK →
Turn Signal Rear	7440	Buy 7440 →
Brake Light	7443	Buy 7443 →
Tail Light	7443	Buy 7443 →
Side Marker	7443	Buy 7443 →
Door Light	194	Buy 194 →
Map Light	168	Buy 168 →