What is the low beam headlight bulb size for a 1986 Toyota Camry?

The 1986 Toyota Camry uses a 9004 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1986 Toyota Camry?

The high beam bulb size for the 1986 Toyota Camry is N/A.

Why are my 1986 Toyota Camry headlights dim?

Dim headlights on a 1986 Toyota Camry can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1986 Toyota Camry fog light?

The 1986 Toyota Camry typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1986 Toyota Camry single or dual beam?

The 1986 Toyota Camry uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1986 Toyota Camry?

Yes, the 1986 Toyota Camry comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED conversion kit for the low beams.

Did the 1986 Toyota Camry change headlight bulb sizes from the previous year?

Yes — the 1986 Toyota Camry uses different bulb sizes than the 1985 model. The 1986 generation introduced this bulb configuration.

Is the 1986 Toyota Camry the first or last year to use 9004 bulbs?

The 1986 Toyota Camry is the only year in the 1986 generation to use the 9004 bulb for the low beam headlight.

How do I change the headlight on a 1986 Toyota Camry?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1986 Toyota Camry?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1986 Toyota Camry headlights?

A pair of halogen 9004 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1986 Toyota Camry?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 position are available as direct plug-and-play replacements.

The 1986 Toyota Camry has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1986 Toyota Camry

What Size Bulbs Does a 1986 Toyota Camry Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1986 Toyota Camry Have?

Lighting on the 1986 Toyota Camry is managed by a total of 9 bulbs, covering everything from primary headlights to signal indicators. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate 9004 low beam and high beam bulbs for precise light distribution. This model belongs to the early years of the Camry's 1983-2023 production span.

Can You Put LED Bulbs in a 1986 Toyota Camry?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9004 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance.

1986 Toyota Camry Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	1156	Buy 1156 →
Low Beam	9004	Buy 9004 →
Parking Light	168	Buy 168 →
Brake Light	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →
Side Marker	194	Buy 194 →
Reverse Light	1156	Buy 1156 →
Turn Signal Rear	1156	Buy 1156 →
Trunk Light	168	Buy 168 →

How do the 1986 Toyota Camry's bulbs compare to other years?

The 1986 Toyota Camry changed bulb sizes from 1985. The previous model year used a different configuration.

The 1987 model switched to a different bulb configuration.

This bulb configuration covers the 1986 model years. ← 1985 1987 →

Finding the best installation guide...

Other Camry Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1992 1991 1990 1989 1988 1987 1985 1984 1983

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Fog Camry Hybrid

Other Vehicles That Use 9004 Bulbs

2005 Pontiac Montana 2004 Oldsmobile Silhouette 2003 Dodge Ram Van 2003 Dodge Wagon 2002 Mercedes-Benz SL-class 2002 Mercedes-Benz SL500