What is the low beam headlight bulb size for a 2003 Subaru WRX?

The 2003 Subaru WRX uses a 9007 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2003 Subaru WRX?

The high beam bulb size for the 2003 Subaru WRX is 9007 LED.

Why are my 2003 Subaru WRX headlights dim?

Dim headlights on a 2003 Subaru WRX can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2003 Subaru WRX fog light?

The 2003 Subaru WRX uses a H3 LED bulb for the fog light position.

Is the 2003 Subaru WRX single or dual beam?

The 2003 Subaru WRX uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2003 Subaru WRX?

Yes, the 2003 Subaru WRX comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED LED conversion kit for the low beams.

Does the 2003 Subaru WRX have fog lights?

Yes, the 2003 Subaru WRX takes a H3 LED bulb for the fog light position.

Did the 2003 Subaru WRX change headlight bulb sizes from the previous year?

No — the 2003 Subaru WRX uses the same bulb sizes as the 2002 model. This configuration has been consistent across the 2002–2003 generation.

Is the 2003 Subaru WRX the first or last year to use 9007 LED bulbs?

The 2003 Subaru WRX is the last year in the 2002–2003 generation to use the 9007 LED bulb for the low beam headlight.

How do I change the headlight on a 2003 Subaru WRX?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2003 Subaru WRX?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2003 Subaru WRX headlights?

A pair of halogen 9007 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2003 Subaru WRX?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 LED position are available as direct plug-and-play replacements.

The 2003 Subaru WRX is the last model year to use this bulb configuration (2002–2003).

Fitment Guaranteed for 2003 Subaru WRX

What Size Bulbs Does a 2003 Subaru WRX Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2003 Subaru WRX Have?

The 2003 Subaru WRX utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by a halogen-based setup where a single 9007 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the WRX's 2002-2021 production span.

Can You Put LED Bulbs in a 2003 Subaru WRX?

Upgrading to LED is one of the most effective ways to modernize your Subaru's appearance and safety profile. Since your WRX uses a single 9007 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H3 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2003 Subaru WRX Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9007 LED	Buy 9007 LED →
High Beam	9007 LED	Buy 9007 LED →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	912 LED	Buy 912 LED →
Side Marker	168 LED	Buy 168 LED →
Turn Signal Front	1156 LED	Buy 1156 LED →
Turn Signal Rear	12496 LED	Buy 12496 LED →
Reverse Light	7440	Buy 7440 →
Dome Light	DE3175	Buy DE3175 →
License Plate	168	Buy 168 →
Map Light	168	Buy 168 →
Parking Light	168	Buy 168 →
Trunk Light	912	Buy 912 →

How do the 2003 Subaru WRX's bulbs compare to other years?

The 2003 Subaru WRX uses the same bulbs as the 2002 model.

The 2004 model switched to a different bulb configuration.

This bulb configuration covers the 2002–2003 model years. ← 2002 2004 →

Finding the best installation guide...

Other WRX Years

2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2002

More from Subaru

1400 Ascent B9 Tribeca BRZ Baja Brat Crosstek Crosstrek

Other Vehicles That Use 9007 LED Bulbs

2019 Mitsubishi Mirage G4 2019 Nissan Frontier 2019 Nissan Versa Note 2015 Nissan Xterra 2014 Nissan Juke 2012 Mitsubishi Galant