What is the low beam headlight bulb size for a 2012 Subaru WRX STI?

The 2012 Subaru WRX STI uses a HID-D2S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2012 Subaru WRX STI?

The high beam bulb size for the 2012 Subaru WRX STI is 9005 LED.

Why are my 2012 Subaru WRX STI headlights dim?

Dim headlights on a 2012 Subaru WRX STI can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D2S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2012 Subaru WRX STI fog light?

The 2012 Subaru WRX STI uses a 9006 LED bulb for the fog light position.

Is the 2012 Subaru WRX STI single or dual beam?

The 2012 Subaru WRX STI uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2012 Subaru WRX STI?

Yes, the 2012 Subaru WRX STI comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D2S LED LED conversion kit for the low beams.

Does the 2012 Subaru WRX STI have fog lights?

Yes, the 2012 Subaru WRX STI takes a 9006 LED bulb for the fog light position.

Did the 2012 Subaru WRX STI change headlight bulb sizes from the previous year?

No — the 2012 Subaru WRX STI uses the same bulb sizes as the 2011 model. This configuration has been consistent across the 2011–2012 generation.

Is the 2012 Subaru WRX STI the first or last year to use HID-D2S LED bulbs?

The 2012 Subaru WRX STI is the last year in the 2011–2012 generation to use the HID-D2S LED bulb for the low beam headlight.

How do I change the headlight on a 2012 Subaru WRX STI?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D2S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2012 Subaru WRX STI?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D2S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2012 Subaru WRX STI headlights?

A pair of HID HID-D2S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2012 Subaru WRX STI?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D2S LED position are available as direct plug-and-play replacements.

The 2012 Subaru WRX STI is the last model year to use this bulb configuration (2011–2012).

Fitment Guaranteed for 2012 Subaru WRX STI

What Size Bulbs Does a 2012 Subaru WRX STI Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2012 Subaru WRX STI Have?

Lighting on the 2012 Subaru WRX STI is managed by a total of 14 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D2S projector housings for high-intensity output.

Can You Put LED Bulbs in a 2012 Subaru WRX STI?

The 2012 Subaru WRX STI is already equipped with factory D2S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the 9006 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2012 Subaru WRX STI Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D2S LED	Buy HID-D2S LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	9006 LED	Buy 9006 LED →
Brake Light	7506 LED	Buy 7506 LED →
Side Marker	7443 LED	Buy 7443 LED →
Turn Signal Front	1157NA LED	Buy 1157NA LED →
Turn Signal Rear	7440NA LED	Buy 7440NA LED →
Reverse Light	7440	Buy 7440 →
Dome Light	DE3175	Buy DE3175 →
License Plate	168	Buy 168 →
Map Light	DE3175	Buy DE3175 →
Parking Light	1157NA	Buy 1157NA →
Trunk Light	168	Buy 168 →
Tail Light	7443	Buy 7443 →

How do the 2012 Subaru WRX STI's bulbs compare to other years?

The 2012 Subaru WRX STI uses the same bulbs as the 2011 model.

The 2013 model switched to a different bulb configuration.

This bulb configuration covers the 2011–2012 model years. ← 2011 2013 →

Finding the best installation guide...

Other WRX STI Years

2020 2019 2018 2017 2016 2015 2014 2013 2011 2010 2009 2008 2007 2006 2005 2004

More from Subaru

1400 Ascent B9 Tribeca BRZ Baja Brat Crosstek Crosstrek

Other Vehicles That Use HID-D2S LED Bulbs

2019 Infiniti QX60 2019 Mitsubishi Outlander Sport 2019 Mitsubishi RVR 2019 Nissan 370Z 2018 Honda Odyssey 2017 Infiniti QX50