What is the low beam headlight bulb size for a 1989 Oldsmobile Cutlass Ciera?

The 1989 Oldsmobile Cutlass Ciera uses a 9006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1989 Oldsmobile Cutlass Ciera?

The high beam bulb size for the 1989 Oldsmobile Cutlass Ciera is 9005.

Why are my 1989 Oldsmobile Cutlass Ciera headlights dim?

Dim headlights on a 1989 Oldsmobile Cutlass Ciera can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1989 Oldsmobile Cutlass Ciera fog light?

The 1989 Oldsmobile Cutlass Ciera typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1989 Oldsmobile Cutlass Ciera single or dual beam?

The 1989 Oldsmobile Cutlass Ciera uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1989 Oldsmobile Cutlass Ciera?

Yes, the 1989 Oldsmobile Cutlass Ciera comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED conversion kit for the low beams.

Did the 1989 Oldsmobile Cutlass Ciera change headlight bulb sizes from the previous year?

Yes — the 1989 Oldsmobile Cutlass Ciera uses different bulb sizes than the 1987 model. The 1989 generation introduced this bulb configuration.

Is the 1989 Oldsmobile Cutlass Ciera the first or last year to use 9006 bulbs?

The 1989 Oldsmobile Cutlass Ciera is the only year in the 1989 generation to use the 9006 bulb for the low beam headlight.

How do I change the headlight on a 1989 Oldsmobile Cutlass Ciera?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1989 Oldsmobile Cutlass Ciera?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1989 Oldsmobile Cutlass Ciera headlights?

A pair of halogen 9006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1989 Oldsmobile Cutlass Ciera?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 position are available as direct plug-and-play replacements.

The 1989 Oldsmobile Cutlass Ciera has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1989 Oldsmobile Cutlass Ciera

What Size Bulbs Does a 1989 Oldsmobile Cutlass Ciera Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1989 Oldsmobile Cutlass Ciera Have?

Lighting on the 1989 Oldsmobile Cutlass Ciera is managed by a total of 11 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 low beam and 9005 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 1989 Oldsmobile Cutlass Ciera?

Upgrading to LED is one of the most effective ways to modernize your Oldsmobile's appearance and safety profile. We recommend starting your upgrade with the 9006 low beams, as they see the most use. Adding a matching 9005 LED kit later will complete the look and ensure consistent lighting performance.

1989 Oldsmobile Cutlass Ciera Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	1157A	Buy 1157A →
Low Beam	9006	Buy 9006 →
Side Marker	194	Buy 194 →
High Beam	9005	Buy 9005 →
Brake Light	1157	Buy 1157 →
License Plate	194	Buy 194 →
Parking Light	1157A	Buy 1157A →
Turn Signal Rear	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Map Light	906	Buy 906 →