What is the low beam headlight bulb size for a 1996 Mitsubishi Eclipse?

The 1996 Mitsubishi Eclipse uses a 9006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 Mitsubishi Eclipse?

The high beam bulb size for the 1996 Mitsubishi Eclipse is 9005.

Why are my 1996 Mitsubishi Eclipse headlights dim?

Dim headlights on a 1996 Mitsubishi Eclipse can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 Mitsubishi Eclipse fog light?

The 1996 Mitsubishi Eclipse typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1996 Mitsubishi Eclipse single or dual beam?

The 1996 Mitsubishi Eclipse uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1996 Mitsubishi Eclipse?

Yes, the 1996 Mitsubishi Eclipse comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED conversion kit for the low beams.

Did the 1996 Mitsubishi Eclipse change headlight bulb sizes from the previous year?

Yes — the 1996 Mitsubishi Eclipse uses different bulb sizes than the 1995 model. The 1996 generation introduced this bulb configuration.

Is the 1996 Mitsubishi Eclipse the first or last year to use 9006 bulbs?

The 1996 Mitsubishi Eclipse is the only year in the 1996 generation to use the 9006 bulb for the low beam headlight.

How do I change the headlight on a 1996 Mitsubishi Eclipse?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 Mitsubishi Eclipse?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 Mitsubishi Eclipse headlights?

A pair of halogen 9006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 Mitsubishi Eclipse?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 position are available as direct plug-and-play replacements.

The 1996 Mitsubishi Eclipse has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1996 Mitsubishi Eclipse

What Size Bulbs Does a 1996 Mitsubishi Eclipse Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 Mitsubishi Eclipse Have?

Owners of the 1996 Mitsubishi Eclipse will find a total of 10 lighting elements throughout the vehicle's exterior. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate 9006 low beam and 9005 high beam bulbs for precise light distribution. This model belongs to the mid years of the Eclipse's 1990-2012 production span.

Can You Put LED Bulbs in a 1996 Mitsubishi Eclipse?

Upgrading to LED is one of the most effective ways to modernize your Mitsubishi's appearance and safety profile. We recommend starting your upgrade with the 9006 low beams, as they see the most use. Adding a matching 9005 LED kit later will complete the look and ensure consistent lighting performance.

1996 Mitsubishi Eclipse Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006	Buy 9006 →
Side Marker	168	Buy 168 →
Turn Signal Front	1157	Buy 1157 →
High Beam	9005	Buy 9005 →
Reverse Light	1156	Buy 1156 →
Parking Light	1157	Buy 1157 →
Brake Light	3497	Buy 3497 →
License Plate	168	Buy 168 →
Trunk Light	DE3022	Buy DE3022 →
Dome Light	DE3175	Buy DE3175 →