What is the low beam headlight bulb size for a 2013 Mazda 2?

The 2013 Mazda 2 uses a 9003 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 Mazda 2?

The high beam bulb size for the 2013 Mazda 2 is 9003 LED.

Why are my 2013 Mazda 2 headlights dim?

Dim headlights on a 2013 Mazda 2 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9003 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 Mazda 2 fog light?

The 2013 Mazda 2 uses a H11 LED bulb for the fog light position.

Is the 2013 Mazda 2 single or dual beam?

The 2013 Mazda 2 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2013 Mazda 2?

Yes, the 2013 Mazda 2 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9003 LED LED conversion kit for the low beams.

Does the 2013 Mazda 2 have fog lights?

Yes, the 2013 Mazda 2 takes a H11 LED bulb for the fog light position.

Did the 2013 Mazda 2 change headlight bulb sizes from the previous year?

Yes — the 2013 Mazda 2 uses different bulb sizes than the 2012 model. The 2013 generation introduced this bulb configuration.

Is the 2013 Mazda 2 the first or last year to use 9003 LED bulbs?

The 2013 Mazda 2 is the only year in the 2013 generation to use the 9003 LED bulb for the low beam headlight.

How do I change the headlight on a 2013 Mazda 2?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9003 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 Mazda 2?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9003 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 Mazda 2 headlights?

A pair of halogen 9003 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 Mazda 2?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9003 LED position are available as direct plug-and-play replacements.

The 2013 Mazda 2 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2013 Mazda 2

What Size Bulbs Does a 2013 Mazda 2 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 Mazda 2 Have?

When it comes to nighttime visibility, the 2013 Mazda 2 relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single 9003 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the 2's 2011-2014 production span.

Can You Put LED Bulbs in a 2013 Mazda 2?

Upgrading to LED is one of the most effective ways to modernize your Mazda's appearance and safety profile. Since your 2 uses a single 9003 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H11 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2013 Mazda 2 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9003 LED	Buy 9003 LED →
High Beam	9003 LED	Buy 9003 LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	7443CK	Buy 7443CK →
Side Marker	7443 LED	Buy 7443 LED →
Turn Signal Front	2827 LED	Buy 2827 LED →
Turn Signal Rear	7440NA LED	Buy 7440NA LED →
Dome Light	DE3175	Buy DE3175 →
License Plate	2825	Buy 2825 →
Parking Light	2825	Buy 2825 →
Reverse Light	921	Buy 921 →
Trunk Light	DE3022	Buy DE3022 →
Tail Light	7443	Buy 7443 →

How do the 2013 Mazda 2's bulbs compare to other years?

The 2013 Mazda 2 changed bulb sizes from 2012. The previous model year used a different configuration.

The 2014 model switched to a different bulb configuration.

This bulb configuration covers the 2013 model years. ← 2012 2014 →

Finding the best installation guide...

Other 2 Years

2014 2012 2011

More from Mazda

3 3 H/Back 3 Sedan 3 Sport 323 5 6 626

Other Vehicles That Use 9003 LED Bulbs

2023 Kia Rio 2021 Toyota Tundra 2020 Honda Fit 2019 MINI Cooper 2019 Nissan Micra 2019 Nissan Versa