What is the low beam headlight bulb size for a 1984 Jeep Wagoneer?

The 1984 Jeep Wagoneer uses a 6052 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1984 Jeep Wagoneer?

The high beam bulb size for the 1984 Jeep Wagoneer is 194.

Why are my 1984 Jeep Wagoneer headlights dim?

Dim headlights on a 1984 Jeep Wagoneer can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 6052 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1984 Jeep Wagoneer fog light?

The 1984 Jeep Wagoneer uses a LED Fog Light bulb for the fog light position.

Is the 1984 Jeep Wagoneer single or dual beam?

The 1984 Jeep Wagoneer uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1984 Jeep Wagoneer?

Yes, the 1984 Jeep Wagoneer comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 6052 LED LED conversion kit for the low beams.

Does the 1984 Jeep Wagoneer have fog lights?

Yes, the 1984 Jeep Wagoneer takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 1984 Jeep Wagoneer?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 6052 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1984 Jeep Wagoneer?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 6052 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1984 Jeep Wagoneer headlights?

A pair of halogen 6052 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1984 Jeep Wagoneer?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 6052 LED position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 1983–1984 Jeep Wagoneer generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 1984 Jeep Wagoneer

What Size Bulbs Does a 1984 Jeep Wagoneer Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1984 Jeep Wagoneer Have?

The 1984 Jeep Wagoneer utilizes a refined lighting configuration featuring 11 distinct bulb positions. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 6052 LED low beam and 194 high beam bulbs for precise light distribution. This model belongs to the early years of the Wagoneer's 1983-1990 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1984 Jeep Wagoneer?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 6052 LED low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1984 Jeep Wagoneer Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	6052 LED	Buy 6052 LED →
High Beam	194	Buy 194 →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	Brake Light Assembly	Buy Brake Light Assembly →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	1157 LED	Buy 1157 LED →
Turn Signal Rear	1157 LED	Buy 1157 LED →
Reverse Light	1156	Buy 1156 →
License Plate	1157	Buy 1157 →
Parking Light	1157	Buy 1157 →
Trunk Light	LED Light	Buy LED Light →