What is the low beam headlight bulb size for a 1975 Jeep Wagoneer?

The 1975 Jeep Wagoneer uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1975 Jeep Wagoneer?

The high beam bulb size for the 1975 Jeep Wagoneer is N/A.

Why are my 1975 Jeep Wagoneer headlights dim?

Dim headlights on a 1975 Jeep Wagoneer can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1975 Jeep Wagoneer fog light?

The 1975 Jeep Wagoneer typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1975 Jeep Wagoneer single or dual beam?

The 1975 Jeep Wagoneer uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1975 Jeep Wagoneer?

Yes, the 1975 Jeep Wagoneer comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1975 Jeep Wagoneer change headlight bulb sizes from the previous year?

Yes — the 1975 Jeep Wagoneer uses different bulb sizes than the 1974 model. The 1975 generation introduced this bulb configuration.

Is the 1975 Jeep Wagoneer the first or last year to use H6024 bulbs?

The 1975 Jeep Wagoneer is the only year in the 1975 generation to use the H6024 bulb for the low beam headlight.

How do I change the headlight on a 1975 Jeep Wagoneer?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1975 Jeep Wagoneer?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1975 Jeep Wagoneer headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1975 Jeep Wagoneer?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1975 Jeep Wagoneer has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1975 Jeep Wagoneer

What Size Bulbs Does a 1975 Jeep Wagoneer Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1975 Jeep Wagoneer Have?

Lighting on the 1975 Jeep Wagoneer is managed by a total of 4 bulbs, covering everything from primary headlights to signal indicators. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution. This model belongs to the mid years of the Wagoneer's 1965-1990 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1975 Jeep Wagoneer?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1975 Jeep Wagoneer Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	1157A	Buy 1157A →
Side Marker	194	Buy 194 →
Low Beam	H6024	Buy H6024 →
Parking Light	1157A	Buy 1157A →

How do the 1975 Jeep Wagoneer's bulbs compare to other years?

The 1975 Jeep Wagoneer changed bulb sizes from 1974. The previous model year used a different configuration.

The 1976 model switched to a different bulb configuration.

This bulb configuration covers the 1975 model years. ← 1974 1976 →

Finding the best installation guide...

Other Wagoneer Years

1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1974 1973 1972 1971 1970 1969 1968 1967 1965

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero