What is the low beam headlight bulb size for a 2012 Honda CR-V?

The 2012 Honda CR-V uses a 9003 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2012 Honda CR-V?

The high beam bulb size for the 2012 Honda CR-V is 9003 LED.

Why are my 2012 Honda CR-V headlights dim?

Dim headlights on a 2012 Honda CR-V can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9003 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2012 Honda CR-V fog light?

The 2012 Honda CR-V uses a H11 bulb for the fog light position.

Is the 2012 Honda CR-V single or dual beam?

The 2012 Honda CR-V uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2012 Honda CR-V?

Yes, the 2012 Honda CR-V comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9003 LED LED conversion kit for the low beams.

Does the 2012 Honda CR-V have fog lights?

Yes, the 2012 Honda CR-V takes a H11 bulb for the fog light position.

Did the 2012 Honda CR-V change headlight bulb sizes from the previous year?

Yes — the 2012 Honda CR-V uses different bulb sizes than the 2011 model. The 2012 generation introduced this bulb configuration.

Is the 2012 Honda CR-V the first or last year to use 9003 LED bulbs?

The 2012 Honda CR-V is the only year in the 2012 generation to use the 9003 LED bulb for the low beam headlight.

How do I change the headlight on a 2012 Honda CR-V?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9003 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2012 Honda CR-V?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9003 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2012 Honda CR-V headlights?

A pair of halogen 9003 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2012 Honda CR-V?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9003 LED position are available as direct plug-and-play replacements.

The 2012 Honda CR-V has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2012 Honda CR-V

What Size Bulbs Does a 2012 Honda CR-V Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2012 Honda CR-V Have?

Owners of the 2012 Honda CR-V will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single 9003 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the CR-V's 1997-2022 production span.

Can You Put LED Bulbs in a 2012 Honda CR-V?

Upgrading to LED is one of the most effective ways to modernize your Honda's appearance and safety profile. Since your CR-V uses a single 9003 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H11 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2012 Honda CR-V Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9003 LED	Buy 9003 LED →
High Beam	9003 LED	Buy 9003 LED →
Fog Light	H11	Buy H11 →
Daytime Running	H4	Buy H4 →
Side Marker	168	Buy 168 →
Turn Signal Front	1157A	Buy 1157A →
Brake Light	7443	Buy 7443 →
Turn Signal Rear	7440NA	Buy 7440NA →
Tail Light	7443	Buy 7443 →
License Plate	168	Buy 168 →
Parking Light	1157A	Buy 1157A →
Reverse Light	7440	Buy 7440 →
Dome Light	DE3175	Buy DE3175 →
Map Light	DE3175	Buy DE3175 →

How do the 2012 Honda CR-V's bulbs compare to other years?

The 2012 Honda CR-V changed bulb sizes from 2011. The previous model year used a different configuration.

The 2013 model switched to a different bulb configuration.

This bulb configuration covers the 2012 model years. ← 2011 2013 →

Finding the best installation guide...

Other CR-V Years

2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997

Other Vehicles That Use 9003 LED Bulbs

2023 Kia Rio 2021 Toyota Tundra 2019 MINI Cooper 2019 Nissan Micra 2019 Nissan Versa 2019 Toyota Yaris