What is the low beam headlight bulb size for a 1995 Dodge Viper?

The 1995 Dodge Viper uses a 9005 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1995 Dodge Viper?

The high beam bulb size for the 1995 Dodge Viper is 9005.

Why are my 1995 Dodge Viper headlights dim?

Dim headlights on a 1995 Dodge Viper can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9005 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1995 Dodge Viper fog light?

The 1995 Dodge Viper typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1995 Dodge Viper single or dual beam?

The 1995 Dodge Viper uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1995 Dodge Viper?

Yes, the 1995 Dodge Viper comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9005 LED conversion kit for the low beams.

Did the 1995 Dodge Viper change headlight bulb sizes from the previous year?

Yes — the 1995 Dodge Viper uses different bulb sizes than the 1994 model. The 1995 generation introduced this bulb configuration.

Is the 1995 Dodge Viper the first or last year to use 9005 bulbs?

The 1995 Dodge Viper is the only year in the 1995 generation to use the 9005 bulb for the low beam headlight.

How do I change the headlight on a 1995 Dodge Viper?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9005 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1995 Dodge Viper?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9005 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1995 Dodge Viper headlights?

A pair of halogen 9005 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1995 Dodge Viper?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9005 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1995 Dodge Viper has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1995 Dodge Viper

What Size Bulbs Does a 1995 Dodge Viper Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1995 Dodge Viper Have?

When it comes to nighttime visibility, the 1995 Dodge Viper relies on an arrangement of 12 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single 9005 dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Viper's 1992-2017 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1995 Dodge Viper?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. Since your Viper uses a single 9005 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1995 Dodge Viper Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	3157NA	Buy 3157NA →
High Beam	9005	Buy 9005 →
Low Beam	9005	Buy 9005 →
Side Marker	194	Buy 194 →
Turn Signal Rear	3157CK	Buy 3157CK →
Tail Light	3157CK	Buy 3157CK →
Brake Light	891	Buy 891 →
Parking Light	3157NA	Buy 3157NA →
Reverse Light	3157	Buy 3157 →
License Plate	168	Buy 168 →
Trunk Light	912	Buy 912 →
Dome Light	168	Buy 168 →

How do the 1995 Dodge Viper's bulbs compare to other years?

The 1995 Dodge Viper changed bulb sizes from 1994. The previous model year used a different configuration.

The 1996 model switched to a different bulb configuration.

This bulb configuration covers the 1995 model years. ← 1994 1996 →

Finding the best installation guide...

Other Viper Years

2017 2016 2015 2010 2009 2008 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1994 1993 1992

Other Vehicles That Use 9005 Bulbs

2022 Honda Accord 2022 Hyundai Elantra 2022 Kia Niro 2022 Kia Seltos 2022 Kia Soul 2022 Kia Stinger

9005 Comparisons

9005 vs 9006 9005 vs H11 9005 vs H7 9005 vs HB3