What is the low beam headlight bulb size for a 1999 Dodge Avenger?

The 1999 Dodge Avenger uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1999 Dodge Avenger?

The high beam bulb size for the 1999 Dodge Avenger is 9005 LED.

Why are my 1999 Dodge Avenger headlights dim?

Dim headlights on a 1999 Dodge Avenger can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1999 Dodge Avenger fog light?

The 1999 Dodge Avenger uses a H3 LED bulb for the fog light position.

Is the 1999 Dodge Avenger single or dual beam?

The 1999 Dodge Avenger uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1999 Dodge Avenger?

Yes, the 1999 Dodge Avenger comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 1999 Dodge Avenger have fog lights?

Yes, the 1999 Dodge Avenger takes a H3 LED bulb for the fog light position.

Did the 1999 Dodge Avenger change headlight bulb sizes from the previous year?

No — the 1999 Dodge Avenger uses the same bulb sizes as the 1998 model. This configuration has been consistent across the 1995–2000 generation.

How do I change the headlight on a 1999 Dodge Avenger?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1999 Dodge Avenger?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1999 Dodge Avenger headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1999 Dodge Avenger?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1999 Dodge Avenger shares its bulb sizes with the 1995–2000 generation.

Fitment Guaranteed for 1999 Dodge Avenger

What Size Bulbs Does a 1999 Dodge Avenger Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1999 Dodge Avenger Have?

When it comes to nighttime visibility, the 1999 Dodge Avenger relies on an arrangement of 12 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 LED low beam and 9005 LED high beam bulbs for precise light distribution. This model belongs to the early years of the Avenger's 1995-2014 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1999 Dodge Avenger?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the 9006 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H3 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1999 Dodge Avenger Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	921 LED	Buy 921 LED →
Side Marker	168 LED	Buy 168 LED →
Turn Signal Front	1156 LED	Buy 1156 LED →
Turn Signal Rear	2057 LED	Buy 2057 LED →
Dome Light	DE3175	Buy DE3175 →
License Plate	168	Buy 168 →
Parking Light	168	Buy 168 →
Reverse Light	1156	Buy 1156 →
Trunk Light	DE3022	Buy DE3022 →

How do the 1999 Dodge Avenger's bulbs compare to other years?

The 1999 Dodge Avenger uses the same bulbs as the 1998 model.

The 2000 model continues with the same bulb sizes.

This bulb configuration covers the 1995–2000 model years. ← 1998 2000 →

Finding the best installation guide...

Other Avenger Years

2014 2013 2012 2011 2010 2009 2008 2000 1998 1997 1996 1995

Other Vehicles That Use 9006 LED Bulbs

2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2018 Chevrolet Express 2500 2015 Honda Civic 2015 Nissan Armada 2015 Nissan Titan