What is the low beam headlight bulb size for a 2012 Chrysler 300?

The 2012 Chrysler 300 uses a HID-D3S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2012 Chrysler 300?

The high beam bulb size for the 2012 Chrysler 300 is HID-D3S LED.

Why are my 2012 Chrysler 300 headlights dim?

Dim headlights on a 2012 Chrysler 300 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D3S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2012 Chrysler 300 fog light?

The 2012 Chrysler 300 uses a H11 LED bulb for the fog light position.

Is the 2012 Chrysler 300 single or dual beam?

The 2012 Chrysler 300 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2012 Chrysler 300?

Yes, the 2012 Chrysler 300 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D3S LED LED conversion kit for the low beams.

Does the 2012 Chrysler 300 have fog lights?

Yes, the 2012 Chrysler 300 takes a H11 LED bulb for the fog light position.

Did the 2012 Chrysler 300 change headlight bulb sizes from the previous year?

No — the 2012 Chrysler 300 uses the same bulb sizes as the 2011 model. This configuration has been consistent across the 2011–2014 generation.

How do I change the headlight on a 2012 Chrysler 300?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D3S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2012 Chrysler 300?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D3S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2012 Chrysler 300 headlights?

A pair of HID HID-D3S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2012 Chrysler 300?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D3S LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2012 Chrysler 300 shares its bulb sizes with the 2011–2014 generation.

Fitment Guaranteed for 2012 Chrysler 300

What Size Bulbs Does a 2012 Chrysler 300 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2012 Chrysler 300 Have?

Lighting on the 2012 Chrysler 300 is managed by a total of 12 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D3S projector housings for high-intensity output. This model belongs to the late years of the 300's 1959-2021 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2012 Chrysler 300?

The 2012 Chrysler 300 is already equipped with factory D3S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the H11 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2012 Chrysler 300 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D3S LED	Buy HID-D3S LED →
High Beam	HID-D3S LED	Buy HID-D3S LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	LED Bulb	Buy LED Bulb →
Turn Signal Front	12180 LED	Buy 12180 LED →
Turn Signal Rear	LED Bulb	Buy LED Bulb →
License Plate	2825	Buy 2825 →
Map Light	578	Buy 578 →
Parking Light	LED Bulb	Buy LED Bulb →
Reverse Light	7440	Buy 7440 →
Trunk Light	562	Buy 562 →

How do the 2012 Chrysler 300's bulbs compare to other years?

The 2012 Chrysler 300 uses the same bulbs as the 2011 model.

The 2013 model continues with the same bulb sizes.

This bulb configuration covers the 2011–2014 model years. ← 2011 2013 →

Finding the best installation guide...

Other 300 Years

2021 2020 2019 2018 2017 2016 2015 2014 2013 2011 2010 2009 2008 2007 2006 2005 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1960 1959

More from Chrysler

200 300C 300M Aspen Cirrus Concorde Conquest Cordoba

Other Vehicles That Use HID-D3S LED Bulbs

2023 Chevrolet Camaro 2022 Dodge Charger 2022 Dodge Durango 2022 Hyundai Ioniq 2022 Kia Sportage 2021 Dodge Challenger