What is the low beam headlight bulb size for a 2010 Chrysler 300?

The 2010 Chrysler 300 uses a HID-D1S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2010 Chrysler 300?

The high beam bulb size for the 2010 Chrysler 300 is 9005 LED.

Why are my 2010 Chrysler 300 headlights dim?

Dim headlights on a 2010 Chrysler 300 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D1S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2010 Chrysler 300 fog light?

The 2010 Chrysler 300 uses a LED Fog Light bulb for the fog light position.

Is the 2010 Chrysler 300 single or dual beam?

The 2010 Chrysler 300 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2010 Chrysler 300?

Yes, the 2010 Chrysler 300 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D1S LED LED conversion kit for the low beams.

Does the 2010 Chrysler 300 have fog lights?

Yes, the 2010 Chrysler 300 takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 2010 Chrysler 300?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D1S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2010 Chrysler 300?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D1S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2010 Chrysler 300 headlights?

A pair of HID HID-D1S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2010 Chrysler 300?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D1S LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 2009–2010 Chrysler 300 generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2010 Chrysler 300

What Size Bulbs Does a 2010 Chrysler 300 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2010 Chrysler 300 Have?

The 2010 Chrysler 300 utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D1S projector housings for high-intensity output. This model belongs to the mid years of the 300's 2005-2019 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2010 Chrysler 300?

The 2010 Chrysler 300 is already equipped with factory D1S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the LED Fog Light fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2010 Chrysler 300 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D1S LED	Buy HID-D1S LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	2825 LED	Buy 2825 LED →
Turn Signal Front	3157AK LED	Buy 3157AK LED →
Turn Signal Rear	3757AK LED	Buy 3757AK LED →
Dome Light	578	Buy 578 →
License Plate	2825	Buy 2825 →
Map Light	578	Buy 578 →
Parking Light	3157AK	Buy 3157AK →
Reverse Light	3057	Buy 3057 →
Trunk Light	562	Buy 562 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other 300 Years

2019 2018 2017 2016 2015 2014 2013 2012 2011 2009 2008 2007 2006 2005

More from Chrysler

200 300C 300M Aspen Cirrus Concorde Conquest Crossfire

Other Vehicles That Use HID-D1S LED Bulbs

2019 BMW X6 2019 Genesis G80 2019 Mercedes-Benz Benz GLS450 2019 Mercedes-Benz Benz GLS550 2019 Mercedes-Benz Benz GLS63 AMG 2019 Mercedes-Benz Benz SLC300