What is the low beam headlight bulb size for a 2013 Aston Martin V12 Vantage?

The 2013 Aston Martin V12 Vantage uses a H11 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 Aston Martin V12 Vantage?

The high beam bulb size for the 2013 Aston Martin V12 Vantage is H9.

Why are my 2013 Aston Martin V12 Vantage headlights dim?

Dim headlights on a 2013 Aston Martin V12 Vantage can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H11 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 Aston Martin V12 Vantage fog light?

The 2013 Aston Martin V12 Vantage typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2013 Aston Martin V12 Vantage single or dual beam?

The 2013 Aston Martin V12 Vantage uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2013 Aston Martin V12 Vantage?

Yes, the 2013 Aston Martin V12 Vantage comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H11 LED conversion kit for the low beams.

Did the 2013 Aston Martin V12 Vantage change headlight bulb sizes from the previous year?

No — the 2013 Aston Martin V12 Vantage uses the same bulb sizes as the 2012 model. This configuration has been consistent across the 2012–2013 generation.

Is the 2013 Aston Martin V12 Vantage the first or last year to use H11 bulbs?

The 2013 Aston Martin V12 Vantage is the last year in the 2012–2013 generation to use the H11 bulb for the low beam headlight.

How do I change the headlight on a 2013 Aston Martin V12 Vantage?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H11 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 Aston Martin V12 Vantage?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H11 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 Aston Martin V12 Vantage headlights?

A pair of halogen H11 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 Aston Martin V12 Vantage?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H11 position are available as direct plug-and-play replacements.

The 2013 Aston-Martin V12 Vantage is the last model year to use this bulb configuration (2012–2013).

Fitment Guaranteed for 2013 Aston-Martin V12 Vantage

What Size Bulbs Does a 2013 Aston-Martin V12 Vantage Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 Aston-Martin V12 Vantage Have?

The 2013 Aston-Martin V12 Vantage utilizes a refined lighting configuration featuring 5 distinct bulb positions. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H11 low beam and H9 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 2013 Aston-Martin V12 Vantage?

Upgrading to LED is one of the most effective ways to modernize your Aston-Martin's appearance and safety profile. We recommend starting your upgrade with the H11 low beams, as they see the most use. Adding a matching H9 LED kit later will complete the look and ensure consistent lighting performance.