What is the low beam headlight bulb size for a 2015 Volvo S80?

The 2015 Volvo S80 uses a H7 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2015 Volvo S80?

The high beam bulb size for the 2015 Volvo S80 is H7.

Why are my 2015 Volvo S80 headlights dim?

Dim headlights on a 2015 Volvo S80 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H7 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2015 Volvo S80 fog light?

The 2015 Volvo S80 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2015 Volvo S80 single or dual beam?

The 2015 Volvo S80 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2015 Volvo S80?

Yes, the 2015 Volvo S80 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H7 LED conversion kit for the low beams.

Did the 2015 Volvo S80 change headlight bulb sizes from the previous year?

No — the 2015 Volvo S80 uses the same bulb sizes as the 2014 model. This configuration has been consistent across the 2014–2015 generation.

Is the 2015 Volvo S80 the first or last year to use H7 bulbs?

The 2015 Volvo S80 is the last year in the 2014–2015 generation to use the H7 bulb for the low beam headlight.

How do I change the headlight on a 2015 Volvo S80?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H7 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2015 Volvo S80?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H7 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2015 Volvo S80 headlights?

A pair of halogen H7 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2015 Volvo S80?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H7 position are available as direct plug-and-play replacements.

The 2015 Volvo S80 is the last model year to use this bulb configuration (2014–2015).

Fitment Guaranteed for 2015 Volvo S80

What Size Bulbs Does a 2015 Volvo S80 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2015 Volvo S80 Have?

Owners of the 2015 Volvo S80 will find a total of 5 lighting elements throughout the vehicle's exterior. It features a standard lighting system powered by a halogen-based setup where a single H7 dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the late years of the S80's 1999-2016 production span.

Can You Put LED Bulbs in a 2015 Volvo S80?

Upgrading to LED is one of the most effective ways to modernize your Volvo's appearance and safety profile. Since your S80 uses a single H7 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb.