What is the low beam headlight bulb size for a 1996 Toyota Paseo?

The 1996 Toyota Paseo uses a 9003 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 Toyota Paseo?

The high beam bulb size for the 1996 Toyota Paseo is 9003 LED.

Why are my 1996 Toyota Paseo headlights dim?

Dim headlights on a 1996 Toyota Paseo can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9003 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 Toyota Paseo fog light?

The 1996 Toyota Paseo uses a LED Fog Light bulb for the fog light position.

Is the 1996 Toyota Paseo single or dual beam?

The 1996 Toyota Paseo uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1996 Toyota Paseo?

Yes, the 1996 Toyota Paseo comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9003 LED LED conversion kit for the low beams.

Does the 1996 Toyota Paseo have fog lights?

Yes, the 1996 Toyota Paseo takes a LED Fog Light bulb for the fog light position.

Did the 1996 Toyota Paseo change headlight bulb sizes from the previous year?

Yes — the 1996 Toyota Paseo uses different bulb sizes than the 1995 model. The 1996–1998 generation introduced this bulb configuration.

Is the 1996 Toyota Paseo the first or last year to use 9003 LED bulbs?

The 1996 Toyota Paseo is the first year in the 1996–1998 generation to use the 9003 LED bulb for the low beam headlight.

How do I change the headlight on a 1996 Toyota Paseo?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9003 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 Toyota Paseo?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9003 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 Toyota Paseo headlights?

A pair of halogen 9003 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 Toyota Paseo?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9003 LED position are available as direct plug-and-play replacements.

The 1996 Toyota Paseo is the first model year to use this bulb configuration (1996–1998).

Fitment Guaranteed for 1996 Toyota Paseo

What Size Bulbs Does a 1996 Toyota Paseo Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 Toyota Paseo Have?

Owners of the 1996 Toyota Paseo will find a total of 13 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single 9003 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Paseo's 1991-1999 production span.

Can You Put LED Bulbs in a 1996 Toyota Paseo?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Paseo uses a single 9003 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1996 Toyota Paseo Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9003 LED	Buy 9003 LED →
High Beam	9003 LED	Buy 9003 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	1156 LED	Buy 1156 LED →
Side Marker	2825 LED	Buy 2825 LED →
Turn Signal Front	1157 LED	Buy 1157 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
Dome Light	DE3175	Buy DE3175 →
License Plate	2825	Buy 2825 →
Parking Light	1157	Buy 1157 →
Trunk Light	194	Buy 194 →
Tail Light	1157	Buy 1157 →

How do the 1996 Toyota Paseo's bulbs compare to other years?

The 1996 Toyota Paseo changed bulb sizes from 1995. The previous model year used a different configuration.

The 1997 model continues with the same bulb sizes.

This bulb configuration covers the 1996–1998 model years. ← 1995 1997 →

Finding the best installation guide...

Other Paseo Years

1999 1998 1997 1995 1994 1993 1992 1991

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use 9003 LED Bulbs

2023 Kia Rio 2020 Honda Fit 2019 MINI Cooper 2019 Nissan Micra 2019 Nissan Versa 2018 Honda HR-V