What is the low beam headlight bulb size for a 1986 Toyota MR2?

The 1986 Toyota MR2 uses a H6054 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1986 Toyota MR2?

The high beam bulb size for the 1986 Toyota MR2 is H6054 LED.

Why are my 1986 Toyota MR2 headlights dim?

Dim headlights on a 1986 Toyota MR2 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6054 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1986 Toyota MR2 fog light?

The 1986 Toyota MR2 uses a LED Fog Light bulb for the fog light position.

Is the 1986 Toyota MR2 single or dual beam?

The 1986 Toyota MR2 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1986 Toyota MR2?

Yes, the 1986 Toyota MR2 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6054 LED LED conversion kit for the low beams.

Does the 1986 Toyota MR2 have fog lights?

Yes, the 1986 Toyota MR2 takes a LED Fog Light bulb for the fog light position.

Did the 1986 Toyota MR2 change headlight bulb sizes from the previous year?

No — the 1986 Toyota MR2 uses the same bulb sizes as the 1985 model. This configuration has been consistent across the 1985–1992 generation.

How do I change the headlight on a 1986 Toyota MR2?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6054 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1986 Toyota MR2?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6054 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1986 Toyota MR2 headlights?

A pair of halogen H6054 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1986 Toyota MR2?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6054 LED position are available as direct plug-and-play replacements.

The 1986 Toyota MR2 shares its bulb sizes with the 1985–1992 generation.

Fitment Guaranteed for 1986 Toyota MR2

What Size Bulbs Does a 1986 Toyota MR2 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1986 Toyota MR2 Have?

Owners of the 1986 Toyota MR2 will find a total of 13 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single H6054 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the MR2's 1985-1995 production span.

Can You Put LED Bulbs in a 1986 Toyota MR2?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your MR2 uses a single H6054 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1986 Toyota MR2 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6054 LED	Buy H6054 LED →
High Beam	H6054 LED	Buy H6054 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	1156 LED	Buy 1156 LED →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	1157 LED	Buy 1157 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
Dome Light	DE3175	Buy DE3175 →
License Plate	89	Buy 89 →
Parking Light	1157	Buy 1157 →
Trunk Light	LED Light	Buy LED Light →
Tail Light	1157	Buy 1157 →

How do the 1986 Toyota MR2's bulbs compare to other years?

The 1986 Toyota MR2 uses the same bulbs as the 1985 model.

The 1987 model continues with the same bulb sizes.

This bulb configuration covers the 1985–1992 model years. ← 1985 1987 →

Finding the best installation guide...

Other MR2 Years

1995 1994 1993 1992 1991 1990 1989 1988 1987 1985

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use H6054 LED Bulbs

2018 Chevrolet Express 3500 2016 Ford Econoline Super Duty 2010 Ford F-250 2010 Ford F-350 2010 Ford F-450 Super Duty 2010 Ford F-550 Super Duty