What is the low beam headlight bulb size for a 1991 Toyota Cressida?

The 1991 Toyota Cressida uses a 9004 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1991 Toyota Cressida?

The high beam bulb size for the 1991 Toyota Cressida is 9004 LED.

Why are my 1991 Toyota Cressida headlights dim?

Dim headlights on a 1991 Toyota Cressida can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1991 Toyota Cressida fog light?

The 1991 Toyota Cressida uses a LED Fog Light bulb for the fog light position.

Is the 1991 Toyota Cressida single or dual beam?

The 1991 Toyota Cressida uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1991 Toyota Cressida?

Yes, the 1991 Toyota Cressida comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED LED conversion kit for the low beams.

Does the 1991 Toyota Cressida have fog lights?

Yes, the 1991 Toyota Cressida takes a LED Fog Light bulb for the fog light position.

Did the 1991 Toyota Cressida change headlight bulb sizes from the previous year?

No — the 1991 Toyota Cressida uses the same bulb sizes as the 1990 model. This configuration has been consistent across the 1989–1992 generation.

How do I change the headlight on a 1991 Toyota Cressida?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1991 Toyota Cressida?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1991 Toyota Cressida headlights?

A pair of halogen 9004 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1991 Toyota Cressida?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 LED position are available as direct plug-and-play replacements.

The 1991 Toyota Cressida shares its bulb sizes with the 1989–1992 generation.

Fitment Guaranteed for 1991 Toyota Cressida

What Size Bulbs Does a 1991 Toyota Cressida Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1991 Toyota Cressida Have?

Lighting on the 1991 Toyota Cressida is managed by a total of 13 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a halogen-based setup where a single 9004 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the late years of the Cressida's 1978-1992 production span.

Can You Put LED Bulbs in a 1991 Toyota Cressida?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Cressida uses a single 9004 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1991 Toyota Cressida Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9004 LED	Buy 9004 LED →
High Beam	9004 LED	Buy 9004 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	1156 LED	Buy 1156 LED →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	1156 LED	Buy 1156 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
Dome Light	DE3175	Buy DE3175 →
License Plate	194 or 168	Buy 194 or 168 →
Parking Light	168 or 1157	Buy 168 or 1157 →
Trunk Light	194	Buy 194 →
Tail Light	1157	Buy 1157 →

How do the 1991 Toyota Cressida's bulbs compare to other years?

The 1991 Toyota Cressida uses the same bulbs as the 1990 model.

The 1992 model continues with the same bulb sizes.

This bulb configuration covers the 1989–1992 model years. ← 1990 1992 →

Finding the best installation guide...

Other Cressida Years

1992 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use 9004 LED Bulbs

2005 Chevrolet Venture 2003 Isuzu Rodeo Sport 2002 Dodge Ram 2500 2002 Dodge Ram 3500 2002 Isuzu Trooper 2001 Nissan Xterra