What is the low beam headlight bulb size for a 2019 Toyota C-HR?

The 2019 Toyota C-HR uses a 9012 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2019 Toyota C-HR?

The high beam bulb size for the 2019 Toyota C-HR is 9012 LED.

Why are my 2019 Toyota C-HR headlights dim?

Dim headlights on a 2019 Toyota C-HR can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9012 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2019 Toyota C-HR fog light?

The 2019 Toyota C-HR uses a LED Fog Light bulb for the fog light position.

Is the 2019 Toyota C-HR single or dual beam?

The 2019 Toyota C-HR uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2019 Toyota C-HR?

Yes, the 2019 Toyota C-HR comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9012 LED LED conversion kit for the low beams.

Does the 2019 Toyota C-HR have fog lights?

Yes, the 2019 Toyota C-HR takes a LED Fog Light bulb for the fog light position.

Did the 2019 Toyota C-HR change headlight bulb sizes from the previous year?

No — the 2019 Toyota C-HR uses the same bulb sizes as the 2018 model. This configuration has been consistent across the 2018–2019 generation.

Is the 2019 Toyota C-HR the first or last year to use 9012 LED bulbs?

The 2019 Toyota C-HR is the last year in the 2018–2019 generation to use the 9012 LED bulb for the low beam headlight.

How do I change the headlight on a 2019 Toyota C-HR?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9012 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2019 Toyota C-HR?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9012 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2019 Toyota C-HR headlights?

A pair of halogen 9012 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2019 Toyota C-HR?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9012 LED position are available as direct plug-and-play replacements.

The 2019 Toyota C-HR is the last model year to use this bulb configuration (2018–2019).

Fitment Guaranteed for 2019 Toyota C-HR

What Size Bulbs Does a 2019 Toyota C-HR Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Moderate (Dust covers often present)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2019 Toyota C-HR Have?

The 2019 Toyota C-HR utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by a halogen-based setup where a single 9012 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the C-HR's 2018-2020 production span.

Can You Put LED Bulbs in a 2019 Toyota C-HR?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your C-HR uses a single 9012 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2019 Toyota C-HR Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9012 LED	Buy 9012 LED →
High Beam	9012 LED	Buy 9012 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	168 LED	Buy 168 LED →
Turn Signal Front	12496 LED	Buy 12496 LED →
Turn Signal Rear	7440NA LED	Buy 7440NA LED →
Reverse Light	921	Buy 921 →
Dome Light	DE3175	Buy DE3175 →
License Plate	168	Buy 168 →
Map Light	175	Buy 175 →
Parking Light	LED Bulb	Buy LED Bulb →
Trunk Light	168	Buy 168 →

How do the 2019 Toyota C-HR's bulbs compare to other years?

The 2019 Toyota C-HR uses the same bulbs as the 2018 model.

The 2020 model switched to a different bulb configuration.

This bulb configuration covers the 2018–2019 model years. ← 2018 2020 →

Finding the best installation guide...

Other C-HR Years

2020 2018

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon Camry Camry Fog Camry Hybrid

Other Vehicles That Use 9012 LED Bulbs

2019 Fiat 500 2019 Fiat 500L 2019 Fiat 500X 2019 Mitsubishi Eclipse Cross 2018 Chevrolet Cruze 2016 Jeep Compass