What is the low beam headlight bulb size for a 1986 Subaru Standard?

The 1986 Subaru Standard uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1986 Subaru Standard?

The high beam bulb size for the 1986 Subaru Standard is N/A.

Why are my 1986 Subaru Standard headlights dim?

Dim headlights on a 1986 Subaru Standard can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1986 Subaru Standard fog light?

The 1986 Subaru Standard typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1986 Subaru Standard single or dual beam?

The 1986 Subaru Standard uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1986 Subaru Standard?

Yes, the 1986 Subaru Standard comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1986 Subaru Standard change headlight bulb sizes from the previous year?

Yes — the 1986 Subaru Standard uses different bulb sizes than the 1985 model. The 1986 generation introduced this bulb configuration.

Is the 1986 Subaru Standard the first or last year to use H6024 bulbs?

The 1986 Subaru Standard is the only year in the 1986 generation to use the H6024 bulb for the low beam headlight.

How do I change the headlight on a 1986 Subaru Standard?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1986 Subaru Standard?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1986 Subaru Standard headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1986 Subaru Standard?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements.

The 1986 Subaru Standard has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1986 Subaru Standard

What Size Bulbs Does a 1986 Subaru Standard Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1986 Subaru Standard Have?

When it comes to nighttime visibility, the 1986 Subaru Standard relies on an arrangement of 10 specialized bulbs. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution. This model belongs to the late years of the Standard's 1979-1987 production span.

Can You Put LED Bulbs in a 1986 Subaru Standard?

Upgrading to LED is one of the most effective ways to modernize your Subaru's appearance and safety profile. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance.

1986 Subaru Standard Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	1156	Buy 1156 →
Side Marker	194	Buy 194 →
Low Beam	H6024	Buy H6024 →
Turn Signal Rear	1156	Buy 1156 →
License Plate	194	Buy 194 →
Brake Light	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Trunk Light	168	Buy 168 →
Dome Light	DE3175	Buy DE3175 →

How do the 1986 Subaru Standard's bulbs compare to other years?

The 1986 Subaru Standard changed bulb sizes from 1985. The previous model year used a different configuration.

The 1987 model switched to a different bulb configuration.

This bulb configuration covers the 1986 model years. ← 1985 1987 →

Finding the best installation guide...

Other Standard Years

1987 1985 1984 1983 1982 1981 1979

More from Subaru

1400 Ascent B9 Tribeca BRZ Baja Brat Crosstek Crosstrek

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero