What is the low beam headlight bulb size for a 2000 Subaru Impreza?

The 2000 Subaru Impreza uses a 9003 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2000 Subaru Impreza?

The high beam bulb size for the 2000 Subaru Impreza is 9003 LED.

Why are my 2000 Subaru Impreza headlights dim?

Dim headlights on a 2000 Subaru Impreza can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9003 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2000 Subaru Impreza fog light?

The 2000 Subaru Impreza uses a H3 LED bulb for the fog light position.

Is the 2000 Subaru Impreza single or dual beam?

The 2000 Subaru Impreza uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2000 Subaru Impreza?

Yes, the 2000 Subaru Impreza comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9003 LED LED conversion kit for the low beams.

Does the 2000 Subaru Impreza have fog lights?

Yes, the 2000 Subaru Impreza takes a H3 LED bulb for the fog light position.

Did the 2000 Subaru Impreza change headlight bulb sizes from the previous year?

No — the 2000 Subaru Impreza uses the same bulb sizes as the 1999 model. This configuration has been consistent across the 1998–2001 generation.

How do I change the headlight on a 2000 Subaru Impreza?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9003 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2000 Subaru Impreza?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9003 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2000 Subaru Impreza headlights?

A pair of halogen 9003 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2000 Subaru Impreza?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9003 LED position are available as direct plug-and-play replacements.

The 2000 Subaru Impreza shares its bulb sizes with the 1998–2001 generation.

Fitment Guaranteed for 2000 Subaru Impreza

What Size Bulbs Does a 2000 Subaru Impreza Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2000 Subaru Impreza Have?

The 2000 Subaru Impreza utilizes a refined lighting configuration featuring 14 distinct bulb positions. It features an extensive lighting system powered by a halogen-based setup where a single 9003 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Impreza's 1993-2022 production span.

Can You Put LED Bulbs in a 2000 Subaru Impreza?

Upgrading to LED is one of the most effective ways to modernize your Subaru's appearance and safety profile. Since your Impreza uses a single 9003 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H3 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2000 Subaru Impreza Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9003 LED	Buy 9003 LED →
High Beam	9003 LED	Buy 9003 LED →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	921 LED or 912 LED	Buy 921 LED or 912 LED →
Side Marker	1157 LED	Buy 1157 LED →
Turn Signal Front	194 LED	Buy 194 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
Dome Light	DE3175 or 168	Buy DE3175 or 168 →
License Plate	194	Buy 194 →
Map Light	DE3175	Buy DE3175 →
Parking Light	194	Buy 194 →
Trunk Light	168	Buy 168 →
Tail Light	1157	Buy 1157 →

How do the 2000 Subaru Impreza's bulbs compare to other years?

The 2000 Subaru Impreza uses the same bulbs as the 1999 model.

The 2001 model continues with the same bulb sizes.

This bulb configuration covers the 1998–2001 model years. ← 1999 2001 →

Finding the best installation guide...

Other Impreza Years

2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 1999 1998 1997 1996 1995 1994 1993

More from Subaru

1400 Ascent B9 Tribeca BRZ Baja Brat Crosstek Crosstrek

Other Vehicles That Use 9003 LED Bulbs

2023 Kia Rio 2021 Toyota Tundra 2020 Honda Fit 2019 MINI Cooper 2019 Nissan Micra 2019 Nissan Versa