What is the low beam headlight bulb size for a 1986 Subaru GL-10?

The 1986 Subaru GL-10 uses a H4656 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1986 Subaru GL-10?

The high beam bulb size for the 1986 Subaru GL-10 is H4651.

Why are my 1986 Subaru GL-10 headlights dim?

Dim headlights on a 1986 Subaru GL-10 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4656 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1986 Subaru GL-10 fog light?

The 1986 Subaru GL-10 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1986 Subaru GL-10 single or dual beam?

The 1986 Subaru GL-10 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1986 Subaru GL-10?

Yes, the 1986 Subaru GL-10 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4656 LED conversion kit for the low beams.

Did the 1986 Subaru GL-10 change headlight bulb sizes from the previous year?

Yes — the 1986 Subaru GL-10 uses different bulb sizes than the 1985 model. The 1986 generation introduced this bulb configuration.

Is the 1986 Subaru GL-10 the first or last year to use H4656 bulbs?

The 1986 Subaru GL-10 is the only year in the 1986 generation to use the H4656 bulb for the low beam headlight.

How do I change the headlight on a 1986 Subaru GL-10?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4656 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1986 Subaru GL-10?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4656 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1986 Subaru GL-10 headlights?

A pair of halogen H4656 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1986 Subaru GL-10?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4656 position are available as direct plug-and-play replacements.

The 1986 Subaru GL-10 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1986 Subaru GL-10

What Size Bulbs Does a 1986 Subaru GL-10 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1986 Subaru GL-10 Have?

Owners of the 1986 Subaru GL-10 will find a total of 12 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H4656 low beam and H4651 high beam bulbs for precise light distribution. This model belongs to the early years of the GL-10's 1985-1989 production span.

Can You Put LED Bulbs in a 1986 Subaru GL-10?

Upgrading to LED is one of the most effective ways to modernize your Subaru's appearance and safety profile. We recommend starting your upgrade with the H4656 low beams, as they see the most use. Adding a matching H4651 LED kit later will complete the look and ensure consistent lighting performance.

1986 Subaru GL-10 Bulb Size Chart

Position	Bulb Size	Shop
High Beam	H4651	Buy H4651 →
Low Beam	H4656	Buy H4656 →
Turn Signal Front	1156	Buy 1156 →
Side Marker	194	Buy 194 →
Tail Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Brake Light	1156	Buy 1156 →
Turn Signal Rear	1156	Buy 1156 →
Parking Light	194	Buy 194 →
License Plate	194	Buy 194 →
Trunk Light	168	Buy 168 →
Dome Light	DE3175	Buy DE3175 →

How do the 1986 Subaru GL-10's bulbs compare to other years?

The 1986 Subaru GL-10 changed bulb sizes from 1985. The previous model year used a different configuration.

The 1987 model switched to a different bulb configuration.

This bulb configuration covers the 1986 model years. ← 1985 1987 →

Finding the best installation guide...

Other GL-10 Years

1989 1988 1987 1985

More from Subaru

1400 Ascent B9 Tribeca BRZ Baja Brat Crosstek Crosstrek

Other Vehicles That Use H4656 Bulbs

1992 Chevrolet Camaro 1992 Chrysler New Yorker 1991 Chevrolet G10 1991 Chevrolet Van 1991 Chrysler LeBaron 1991 Ford Country Squire