What is the low beam headlight bulb size for a 1999 Subaru Forester?

The 1999 Subaru Forester uses a 9003 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1999 Subaru Forester?

The high beam bulb size for the 1999 Subaru Forester is 9003 LED.

Why are my 1999 Subaru Forester headlights dim?

Dim headlights on a 1999 Subaru Forester can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9003 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1999 Subaru Forester fog light?

The 1999 Subaru Forester uses a 9006 LED bulb for the fog light position.

Is the 1999 Subaru Forester single or dual beam?

The 1999 Subaru Forester uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1999 Subaru Forester?

Yes, the 1999 Subaru Forester comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9003 LED LED conversion kit for the low beams.

Does the 1999 Subaru Forester have fog lights?

Yes, the 1999 Subaru Forester takes a 9006 LED bulb for the fog light position.

Did the 1999 Subaru Forester change headlight bulb sizes from the previous year?

No — the 1999 Subaru Forester uses the same bulb sizes as the 1998 model. This configuration has been consistent across the 1998–2000 generation.

How do I change the headlight on a 1999 Subaru Forester?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9003 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1999 Subaru Forester?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9003 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1999 Subaru Forester headlights?

A pair of halogen 9003 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1999 Subaru Forester?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9003 LED position are available as direct plug-and-play replacements.

The 1999 Subaru Forester shares its bulb sizes with the 1998–2000 generation.

Fitment Guaranteed for 1999 Subaru Forester

What Size Bulbs Does a 1999 Subaru Forester Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1999 Subaru Forester Have?

Lighting on the 1999 Subaru Forester is managed by a total of 14 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a halogen-based setup where a single 9003 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Forester's 1998-2022 production span.

Can You Put LED Bulbs in a 1999 Subaru Forester?

Upgrading to LED is one of the most effective ways to modernize your Subaru's appearance and safety profile. Since your Forester uses a single 9003 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the 9006 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1999 Subaru Forester Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9003 LED	Buy 9003 LED →
High Beam	9003 LED	Buy 9003 LED →
Fog Light	9006 LED	Buy 9006 LED →
Brake Light	912 LED	Buy 912 LED →
Side Marker	1157NA LED	Buy 1157NA LED →
Turn Signal Front	1157NA LED	Buy 1157NA LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
Dome Light	DE3175	Buy DE3175 →
License Plate	168	Buy 168 →
Map Light	DE3175	Buy DE3175 →
Parking Light	1157NA	Buy 1157NA →
Trunk Light	168	Buy 168 →
Tail Light	1157	Buy 1157 →

How do the 1999 Subaru Forester's bulbs compare to other years?

The 1999 Subaru Forester uses the same bulbs as the 1998 model.

The 2000 model continues with the same bulb sizes.

This bulb configuration covers the 1998–2000 model years. ← 1998 2000 →

Finding the best installation guide...

Other Forester Years

2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1998

More from Subaru

1400 Ascent B9 Tribeca BRZ Baja Brat Crosstek Crosstrek

Other Vehicles That Use 9003 LED Bulbs

2023 Kia Rio 2021 Toyota Tundra 2020 Honda Fit 2019 MINI Cooper 2019 Nissan Micra 2019 Nissan Versa