What is the low beam headlight bulb size for a 1967 Porsche 912?

The 1967 Porsche 912 uses a 6014 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1967 Porsche 912?

The high beam bulb size for the 1967 Porsche 912 is 6014 LED.

Why are my 1967 Porsche 912 headlights dim?

Dim headlights on a 1967 Porsche 912 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 6014 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1967 Porsche 912 fog light?

The 1967 Porsche 912 uses a LED Fog Light bulb for the fog light position.

Is the 1967 Porsche 912 single or dual beam?

The 1967 Porsche 912 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1967 Porsche 912?

Yes, the 1967 Porsche 912 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 6014 LED LED conversion kit for the low beams.

Does the 1967 Porsche 912 have fog lights?

Yes, the 1967 Porsche 912 takes a LED Fog Light bulb for the fog light position.

Did the 1967 Porsche 912 change headlight bulb sizes from the previous year?

No — the 1967 Porsche 912 uses the same bulb sizes as the 1966 model. This configuration has been consistent across the 1965–1968 generation.

How do I change the headlight on a 1967 Porsche 912?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 6014 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1967 Porsche 912?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 6014 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1967 Porsche 912 headlights?

A pair of halogen 6014 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1967 Porsche 912?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 6014 LED position are available as direct plug-and-play replacements.

The 1967 Porsche 912 shares its bulb sizes with the 1965–1968 generation.

Fitment Guaranteed for 1967 Porsche 912

What Size Bulbs Does a 1967 Porsche 912 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1967 Porsche 912 Have?

Owners of the 1967 Porsche 912 will find a total of 12 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single 6014 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the 912's 1965-1976 production span.

Can You Put LED Bulbs in a 1967 Porsche 912?

Upgrading to LED is one of the most effective ways to modernize your Porsche's appearance and safety profile. Since your 912 uses a single 6014 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1967 Porsche 912 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	6014 LED	Buy 6014 LED →
High Beam	6014 LED	Buy 6014 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	1157	Buy 1157 →
Side Marker	5007 LED	Buy 5007 LED →
Turn Signal Front	1156 LED	Buy 1156 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
Dome Light	6411	Buy 6411 →
License Plate	3893	Buy 3893 →
Parking Light	N/A	Buy N/A →
Trunk Light	5007	Buy 5007 →
Tail Light	1157	Buy 1157 →

How do the 1967 Porsche 912's bulbs compare to other years?

The 1967 Porsche 912 uses the same bulbs as the 1966 model.

The 1968 model continues with the same bulb sizes.

This bulb configuration covers the 1965–1968 model years. ← 1966 1968 →

Finding the best installation guide...

Other 912 Years

1976 1969 1968 1966 1965

More from Porsche

718 Boxster 718 Cayman 911 911 (991)911 (997)914 924 928

Other Vehicles That Use 6014 LED Bulbs

1992 Mazda Miata 1987 Toyota Land Cruiser 1986 Isuzu Trooper 1985 Mazda RX7 1980 Toyota Cressida 1980 Volkswagen Super Beetle