What is the low beam headlight bulb size for a 1976 Plymouth Gran Fury?

The 1976 Plymouth Gran Fury uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1976 Plymouth Gran Fury?

The high beam bulb size for the 1976 Plymouth Gran Fury is N/A.

Why are my 1976 Plymouth Gran Fury headlights dim?

Dim headlights on a 1976 Plymouth Gran Fury can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1976 Plymouth Gran Fury fog light?

The 1976 Plymouth Gran Fury typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1976 Plymouth Gran Fury single or dual beam?

The 1976 Plymouth Gran Fury uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1976 Plymouth Gran Fury?

Yes, the 1976 Plymouth Gran Fury comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1976 Plymouth Gran Fury change headlight bulb sizes from the previous year?

Yes — the 1976 Plymouth Gran Fury uses different bulb sizes than the 1975 model. The 1976 generation introduced this bulb configuration.

Is the 1976 Plymouth Gran Fury the first or last year to use H6024 bulbs?

The 1976 Plymouth Gran Fury is the only year in the 1976 generation to use the H6024 bulb for the low beam headlight.

How do I change the headlight on a 1976 Plymouth Gran Fury?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1976 Plymouth Gran Fury?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1976 Plymouth Gran Fury headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1976 Plymouth Gran Fury?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements.

The 1976 Plymouth Gran Fury has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1976 Plymouth Gran Fury

What Size Bulbs Does a 1976 Plymouth Gran Fury Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1976 Plymouth Gran Fury Have?

When it comes to nighttime visibility, the 1976 Plymouth Gran Fury relies on an arrangement of 9 specialized bulbs. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 1976 Plymouth Gran Fury?

Upgrading to LED is one of the most effective ways to modernize your Plymouth's appearance and safety profile. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance.

1976 Plymouth Gran Fury Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6024	Buy H6024 →
Turn Signal Front	1157A	Buy 1157A →
Side Marker	168	Buy 168 →
License Plate	168	Buy 168 →
Brake Light	1157	Buy 1157 →
Turn Signal Rear	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →
Parking Light	1157A	Buy 1157A →
Reverse Light	1156	Buy 1156 →

How do the 1976 Plymouth Gran Fury's bulbs compare to other years?

The 1976 Plymouth Gran Fury changed bulb sizes from 1975. The previous model year used a different configuration.

The 1977 model switched to a different bulb configuration.

This bulb configuration covers the 1976 model years. ← 1975 1977 →

Finding the best installation guide...

Other Gran Fury Years

1989 1988 1987 1986 1985 1983 1980 1977 1975 1974 1972

More from Plymouth

Acclaim Arrow Arrow Pickup Arrow Truck Barracuda Belvedere Belvedere II Breeze

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero