What is the low beam headlight bulb size for a 1966 Oldsmobile Jetstar I?

The 1966 Oldsmobile Jetstar I uses a H5006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1966 Oldsmobile Jetstar I?

The high beam bulb size for the 1966 Oldsmobile Jetstar I is H5001.

Why are my 1966 Oldsmobile Jetstar I headlights dim?

Dim headlights on a 1966 Oldsmobile Jetstar I can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H5006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1966 Oldsmobile Jetstar I fog light?

The 1966 Oldsmobile Jetstar I typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1966 Oldsmobile Jetstar I single or dual beam?

The 1966 Oldsmobile Jetstar I uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1966 Oldsmobile Jetstar I?

Yes, the 1966 Oldsmobile Jetstar I comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H5006 LED conversion kit for the low beams.

Did the 1966 Oldsmobile Jetstar I change headlight bulb sizes from the previous year?

Yes — the 1966 Oldsmobile Jetstar I uses different bulb sizes than the 1965 model. The 1966 generation introduced this bulb configuration.

Is the 1966 Oldsmobile Jetstar I the first or last year to use H5006 bulbs?

The 1966 Oldsmobile Jetstar I is the only year in the 1966 generation to use the H5006 bulb for the low beam headlight.

How do I change the headlight on a 1966 Oldsmobile Jetstar I?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H5006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1966 Oldsmobile Jetstar I?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H5006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1966 Oldsmobile Jetstar I headlights?

A pair of halogen H5006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1966 Oldsmobile Jetstar I?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H5006 position are available as direct plug-and-play replacements.

The 1966 Oldsmobile Jetstar I has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1966 Oldsmobile Jetstar I

What Size Bulbs Does a 1966 Oldsmobile Jetstar I Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1966 Oldsmobile Jetstar I Have?

Lighting on the 1966 Oldsmobile Jetstar I is managed by a total of 8 bulbs, covering everything from primary headlights to signal indicators. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate H5006 low beam and H5001 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 1966 Oldsmobile Jetstar I?

Upgrading to LED is one of the most effective ways to modernize your Oldsmobile's appearance and safety profile. We recommend starting your upgrade with the H5006 low beams, as they see the most use. Adding a matching H5001 LED kit later will complete the look and ensure consistent lighting performance.

1966 Oldsmobile Jetstar I Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	1157A	Buy 1157A →
High Beam	H5001	Buy H5001 →
Low Beam	H5006	Buy H5006 →
Reverse Light	1156	Buy 1156 →
Brake Light	1157	Buy 1157 →
Parking Light	1157A	Buy 1157A →
Turn Signal Rear	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →

How do the 1966 Oldsmobile Jetstar I's bulbs compare to other years?

The 1966 Oldsmobile Jetstar I changed bulb sizes from 1965. The previous model year used a different configuration.

This bulb configuration covers the 1966 model years. ← 1965

Finding the best installation guide...

Other Jetstar I Years

1965

More from Oldsmobile

442 88 98 Achieva Alero Aurora Bravada Calais

Other Vehicles That Use H5006 Bulbs

1992 BMW 3 Series 1991 BMW 318i 1991 BMW 325i 1991 BMW 325iX 1991 BMW 325is 1991 Isuzu Impulse