What is the low beam headlight bulb size for a 1990 Oldsmobile Cutlass Calais?

The 1990 Oldsmobile Cutlass Calais uses a 9004 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1990 Oldsmobile Cutlass Calais?

The high beam bulb size for the 1990 Oldsmobile Cutlass Calais is 9004.

Why are my 1990 Oldsmobile Cutlass Calais headlights dim?

Dim headlights on a 1990 Oldsmobile Cutlass Calais can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1990 Oldsmobile Cutlass Calais fog light?

The 1990 Oldsmobile Cutlass Calais typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1990 Oldsmobile Cutlass Calais single or dual beam?

The 1990 Oldsmobile Cutlass Calais uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1990 Oldsmobile Cutlass Calais?

Yes, the 1990 Oldsmobile Cutlass Calais comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED conversion kit for the low beams.

Did the 1990 Oldsmobile Cutlass Calais change headlight bulb sizes from the previous year?

Yes — the 1990 Oldsmobile Cutlass Calais uses different bulb sizes than the 1989 model. The 1990 generation introduced this bulb configuration.

Is the 1990 Oldsmobile Cutlass Calais the first or last year to use 9004 bulbs?

The 1990 Oldsmobile Cutlass Calais is the only year in the 1990 generation to use the 9004 bulb for the low beam headlight.

How do I change the headlight on a 1990 Oldsmobile Cutlass Calais?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1990 Oldsmobile Cutlass Calais?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1990 Oldsmobile Cutlass Calais headlights?

A pair of halogen 9004 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1990 Oldsmobile Cutlass Calais?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 position are available as direct plug-and-play replacements.

The 1990 Oldsmobile Cutlass Calais has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1990 Oldsmobile Cutlass Calais

What Size Bulbs Does a 1990 Oldsmobile Cutlass Calais Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1990 Oldsmobile Cutlass Calais Have?

When it comes to nighttime visibility, the 1990 Oldsmobile Cutlass Calais relies on an arrangement of 6 specialized bulbs. It features a standard lighting system powered by a halogen-based setup where a single 9004 dual-filament bulb handles both low and high beam duties within the same reflector.

Can You Put LED Bulbs in a 1990 Oldsmobile Cutlass Calais?

Upgrading to LED is one of the most effective ways to modernize your Oldsmobile's appearance and safety profile. Since your Cutlass Calais uses a single 9004 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb.

1990 Oldsmobile Cutlass Calais Bulb Size Chart

Position	Bulb Size	Shop
High Beam	9004	Buy 9004 →
Low Beam	9004	Buy 9004 →
Side Marker	194	Buy 194 →
Brake Light	3155	Buy 3155 →
Reverse Light	1156	Buy 1156 →
License Plate	194	Buy 194 →

How do the 1990 Oldsmobile Cutlass Calais's bulbs compare to other years?

The 1990 Oldsmobile Cutlass Calais changed bulb sizes from 1989. The previous model year used a different configuration.

The 1991 model switched to a different bulb configuration.

This bulb configuration covers the 1990 model years. ← 1989 1991 →

Finding the best installation guide...

Other Cutlass Calais Years

1991 1989 1987 1986 1985 1984 1982 1981 1980 1978

More from Oldsmobile

442 88 98 Achieva Alero Aurora Bravada Calais

Other Vehicles That Use 9004 Bulbs

2005 Pontiac Montana 2003 Dodge Ram Van 2003 Dodge Wagon 2002 Mercedes-Benz SL-class 2002 Mercedes-Benz SL500 2002 Mercedes-Benz SL600